Brother International MFC 9650 Owners Manual - Page 58
For Fax/Tel (F/T) Mode Only, Changing Remote Codes, REMOTE ACT.:ON, SELECT { } & SET, ACT.CODE
View all Brother International MFC 9650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
48 C H A P T E R F I V E For Fax/Tel (F/T) Mode Only When the machine is in Fax/Tel (F/T) Mode, it will use the F/T Ring Time (F/T pseudo-ringing) to alert you to a voice call. If you're at the machine, you can lift the external telephone's handset and press Tel to answer. If you're at an extension phone, you'll need to lift the handset during the F/T Ring Time and press # 5 1 between the F/T pseudo-rings. If no one is on the line, or if someone wants to send you a fax, send the call back to the machine by pressing 5 1. Changing Remote Codes Remote Codes might not work with some telephone systems. The preset Activation Code is 5 1. The preset Deactivation Code is # 5 1. If you are always disconnected when accessing your external TAD remotely, try changing the Activation Code from 5 1 to # # # and the Deactivation Code from # 5 1 to 1 1 1. You cannot use the same number for the Activation Code and the Deactivation Code. To change Remote Codes 1 For the FAX-8350P, Press Menu, 2, 4. For the MFC-9650/FAX-8750P, Press Menu, 1, 2, 4. 2 Press or to select ON (or OFF). REMOTE ACT.:ON SELECT { } & SET 3 Press Set when the screen displays the setting you want. 4 If you want to, enter a new Remote Activation Code, then press Set. ACT.CODE:*51 ENTER & SET 5 If you want to, enter a new Remote Deactivation Code, then press Set. DEACT.CODE:#51 ENTER & SET 6 Press Stop to exit.