Brother International MFC-J6530DW Online Users Guide HTML - Page 611
No Paper Fed, No Paper Fed [Tray, No Response/Busy, Out of Fax Memory, Close, Send Now, Partial Print
View all Brother International MFC-J6530DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 611 highlights
Error Message No Paper Fed No Paper Fed [Tray #1] No Paper Fed [Tray #2] No Response/Busy Out of Fax Memory Out of Memory Paper Size Mismatch Paper Size Mismatch [Tray #1] Paper Size Mismatch [Tray #2] Cause Action The machine is out of paper or paper is not correctly loaded in the paper tray. Do one of the following: • Refill the paper tray, and then follow the LCD instructions. • Remove and reload the paper, and then follow the LCD instructions. See Related Information: Load Paper. The paper was not inserted in the center position of the manual feed slot. Remove the paper and reinsert it in the center of the manual feed slot, and then follow the LCD instructions. See Related Information: Load Paper in the Manual Feed Slot. The Jam Clear Cover is not closed correctly. Make sure the Jam Clear Cover is closed evenly at both ends. See Related Information: Printer Jam or Paper Jam. Paper dust has accumulated on the surface of the paper pick-up rollers. Clean the paper pick-up rollers. See Related Information: Clean the Paper Pick-up Rollers. The number you dialed does not answer Verify the number and try again. or is busy. The fax memory is full. Do one of the following: • Clear the data from the memory. To gain extra memory, you can turn off Memory Receive. See Related Information: Turn Off Memory Receive. • Print the faxes that are in the memory. See Related Information: Print a Fax Stored in the Machine's Memory. The machine's memory is full. If a fax-sending or copy operation is in progress: • Press or Quit or Close and wait until the other operations that are in progress finish, and then try again. • Press Send Now to send the pages scanned so far. • Press Partial Print to copy the pages scanned so far. • Clear the data in the memory. To gain extra memory, you can turn off Memory Receive. See Related Information: Turn Off Memory Receive. • Print the faxes stored in the memory. See Related Information: Print a Fax Stored in the Machine's Memory. The paper size setting does not match the 1. Check that the paper size you selected size of paper in the tray. on the machine's display matches the -OR- size of the paper in the tray. The paper orientation is not proper for the paper size. See Related Information: Change the Paper Size and Paper Type. -OR- 2. Make sure you loaded the paper in the proper orientation and set the paper 604