Brother International MFC-J6530DW Online Users Guide HTML - Page 612
Error Message, Cause, Action, You can still scan even if the ink is, low or needs to be replaced.
View all Brother International MFC-J6530DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 612 highlights
Error Message Paper Tray not detected Paper Tray #1 not detected Paper Tray #2 not detected Repetitive No Paper Fed Repetitive Paper Jams Replace Ink Sending Error Wrong Document Size Settings The maximum number of devices are already connected using Wi-Fi Direct. Touchscreen Init. Failed Tray Settings Tray #1 Settings Tray #2 Settings Cause Action You did not set the paper guides in the tray to the indicators for the paper size you are using. guides at the indicators for your paper size. See Related Information: Load Paper. 3. After you have checked the paper size and the paper orientation, follow the LCD instructions. If printing from your computer, make sure the paper size you selected in the printer driver matches the size of paper in the tray. See Related Information: Print Settings (Windows) or Print Options (Mac). The paper tray is not completely inserted. Slowly push the paper tray completely into the machine. Paper or a foreign object has prevented the paper tray from being inserted properly. Pull the paper tray out of the machine, and remove the jammed paper or foreign object. If you cannot find or remove the jammed paper, see Related Information: Printer Jam or Paper Jam. Paper dust has accumulated on the surface of the paper pick-up rollers. Clean the paper pick-up rollers. See Related Information: Clean the Paper Pick-up Rollers. A foreign object, such as a paper clip or a piece of ripped paper, is in the machine. Remove any foreign objects and paper scraps in the machine. See Related Information: Remove Paper Scraps. One or more of the ink cartridges have Replace the ink cartridges. reached the end of their lives. The See Related Information: Replace the Ink machine will stop all print operations. Cartridges. While memory is available, black & white faxes will be stored in the memory. If the • sending machine has the ability to convert You can still scan even if the ink is low or needs to be replaced. it, the color fax will be stored in the memory as a black & white fax. The document size option does not match Select the correct document size option, the size of your fax document. and then press Fax Start again. Two mobile devices are already connected to the Wi-Fi Direct network when the Brother machine is the Group Owner (G/O). After the current connection between your Brother machine and another mobile device has shut down, try to configure the Wi-Fi Direct settings again. You can confirm the connection status by printing the Network Configuration Report. See Related Information: Print the Network Configuration Report. The touchscreen was pressed before the power on initialization was completed. Make sure nothing is touching or resting on the touchscreen, especially when plugging the machine in. Debris may be stuck between the lower part of the touchscreen and its frame. Insert a piece of stiff paper between the lower part of the touchscreen and its frame and slide it back and forth to push out the debris. This message is displayed when the To not display this confirmation message, setting to confirm the paper type and size change the setting to Off. is enabled. 605