Brother International MFC-J6530DW Online Users Guide HTML - Page 617
No Device, No File, No Paper Fed, No Paper Fed [Tray, No Paper Fed [MP, Tray], No Response/Busy, Out
View all Brother International MFC-J6530DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 617 highlights
Error Message No Device No File No Paper Fed No Paper Fed [Tray #1] No Paper Fed [MP Tray] No Paper Fed [Tray #2] No Response/Busy Out of Fax Memory Out of Memory Cause Action When configuring the Wi-Fi Direct • Make sure your machine and mobile network, the Brother machine cannot find device are in the Wi-Fi Direct mode. your mobile device. • Move the mobile device closer to your Brother machine. • Move your Brother machine and the mobile device to an obstruction-free area. • If you are manually configuring the WiFi Direct network, make sure you have entered the correct password. • If your mobile device has a configuration page for how to obtain an IP address, make sure the IP address of your mobile device has been configured via DHCP. The USB flash drive in the media drive does not contain a .JPG file. Put the correct USB flash drive into the slot again. The machine is out of paper or paper is not correctly loaded in the paper tray. Do one of the following: • Refill the paper tray, and then follow the LCD instructions. • Remove and reload the paper, and then follow the LCD instructions. See Related Information: Load Paper. The paper was not inserted in the center position of the MP tray. Remove the paper and reinsert it in the center of the MP tray, and then follow the LCD instructions. See Related Information: Load Paper in the Multi-purpose Tray (MP Tray). The Jam Clear Cover is not closed correctly. Make sure the Jam Clear Cover is closed evenly at both ends. See Related Information: Printer Jam or Paper Jam. Paper dust has accumulated on the surface of the paper pick-up rollers. Clean the paper pick-up rollers. See Related Information: Clean the Paper Pick-up Rollers. The number you dialed does not answer Verify the number and try again. or is busy. The fax memory is full. Do one of the following: • Clear the data from the memory. To gain extra memory, you can turn off Memory Receive. See Related Information: Turn Off Memory Receive. • Print the faxes that are in the memory. See Related Information: Print a Fax Stored in the Machine's Memory. The machine's memory is full. If a fax-sending or copy operation is in progress: • Press or Quit or Close and wait until the other operations that are in progress finish, and then try again. • Press Send Now to send the pages scanned so far. 610