Canon 1292B002 REALiS Manual - Page 112
Setting up the Digital Video Input Signal, Setting a Password
View all Canon 1292B002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Setting up the Digital Video Input Signal [Digital video] DIGITAL VIDEO You can select the standard of the digital video input signal. Setting a Password [Password settings] DIGITAL PC ANALOG PC DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO You can set a password to the projector. Once you set the password, you will need to enter the password each time you turn on the projector. T System settings T Other settings T Digital video T System settings T Other settings T Password settings F Projects a full range digital signal. L Projects a limited range digital sig- nal. Press the [OK] button to confirm, and then press the [MENU] button. z Refer to the User's Manual that came with the AV equipment for more detailed information on settings. Off Disables the password protection. On Enable the password protection. Press the [OK] button to confirm, and then press the [MENU] button. < z Once you set a password, the password entry screen appears at poweron. Enter a 4-digit password with and [>]. If the password is valid, projection starts. If you enter a wrong password three times, the projector will be turned off. z To cancel the password, remove the power plug from the AC outlet after the projection, and then insert the power plug while holding down the [MENU] button until the projector beeps. < SETTING UP FUNCTIONS FROM MENUS 112