Canon 1292B002 REALiS Manual - Page 72
Select this when you use a screen with aspect ratio of 4:3.
View all Canon 1292B002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
PROJECTING AN IMAGE FROM AV EQUIPMENT Selecting Aspect Ratio of the Projecting Image (Screen aspect) You can select among three aspect ratios of the projecting image according to the aspect ratio of the projected screen. You can project an image on the whole screen by setting [Screen aspect]. z You can set [Screen aspect] from menu. Refer to the section [Screen aspect] on the menu for details (P99). 4:3 Select this when you use a screen with aspect ratio of 4:3. The following table shows the available [Aspect] mode for each input signal. Input signal Available [Aspect] mode VIDEO S-VIDEO SCART Full screen Wide COMPONENT DIGITAL VIDEO Full screen Auto Wide 16:9 Select this when you use a screen with aspect ratio of 16:9. Select [4:3] from the [Aspect] menu if you want to project a video image with aspect ratio of 4:3 in this mode (P71). The following table shows the available [Aspect] mode for each input signal. Input signal Available [Aspect] mode VIDEO S-VIDEO SCART 4:3 Wide COMPONENT (480i/575i/480p/575p) DIGITAL VIDEO (480p/575p) 4:3 Wide COMPONENT DIGITAL VIDEO (720p/1035i/1080i) Wide z [Auto screen color] may not correct the screen color properly. If such is the case, correct it manually. (P96) 72