Canon 1292B002 REALiS Manual - Page 58
Turning Off the Projector
View all Canon 1292B002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
PROJECTING AN IMAGE FROM THE COMPUTER Turning Off the Projector z You may shorten the lamp life if turning off the projector while its lamp is still in an unstable state shortly after turning on the projector. Wait at least 5 minutes before turning off the projector. z Wait at least 5 minutes before turning on the projector when you turn off the projector. It may shorten the lamp life if you turn on the projector immediately after turning it off. z Using the projector for a long time may shorten the life of the lamp and internal optical components. z When the projector is turned off, it starts cooling the lamp. You cannot turn it on during the process. 1 Press the [POWER] button. A confirmation message appears on the screen. To continue projection, wait until the confirmation message disappears (approximately 4 seconds) or press a button other than the [POWER] button. 2 Press the [POWER] button again while the confirmation message is displayed. The lamp goes off, the [POWER] indicator starts flashing in red, and it starts cooling the lamp. 3 Remove the power cord from the AC outlet. It continues to cool down the lamp even after removing the power cord. 58