Canon 1292B002 REALiS Manual - Page 68
Select [DIGITAL VIDEO]., Press the [AUTO SET] button., Press the [AUTO SET] button again.
![]() |
View all Canon 1292B002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Performing the Auto Setup With the auto setup function, a series of screen adjustment and settings, such as Auto focus and Auto keystone is performed automatically when projecting a video image from an AV equipment. You can start the projection only with this operation if the input signal has been appropriately selected. Refer to page 44 for detailed information on items adjusted by performing the auto setup. 1 Select [DIGITAL VIDEO]. Perform the steps shown in the "Selecting DIGITAL VIDEO" section on page 68 before performing the auto setup if you want to project a digital content video image. Skip this step if [DIGITAL VIDEO] has been selected at the previous projection. 2 Press the [AUTO SET] button. The [Auto setup] window appears. PROJECTING AN IMAGE FROM AV EQUIPMENT 3 Press the [AUTO SET] button again. One or more functions highlighted in black are performed automatically. z You can perform this step by selecting [OK] with the [
![](/manual_guide/products/canon-2224b002-realis-manual-5dd60c9/68.png)