Canon 1292B002 REALiS Manual - Page 52
Setting Up the Computer Screen Automatically AUTO PC
View all Canon 1292B002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
PROJECTING AN IMAGE FROM THE COMPUTER Setting Up the Computer Screen Automatically (AUTO PC) This projector automatically makes optimum settings for the total number of dots and tracking depending on a signal type (SXGA+, XGA, etc.). The auto PC adjustment function does not need to be performed if the projector is projecting an image properly with [AUTO SETUP]. You can use this function if the input signal is [ANALOG PC-1] or [ANALOG PC-2]. 1 Press the [AUTO PC] button. The auto PC adjustment function is activated and the projected image is optimized. z For some computers, the auto PC adjustment function does not optimize the projected image. If such is the case, you need to make settings (total dots, tracking, horizontal/vertical positions, horizontal/vertical pixels, etc.) for the input signal (P91-93). z The previous signal type ([ANALOG PC-1] or [ANALOG PC-2]) is recorded. If you connect the projector to the same computer, you can project the image with the same settings as before simply by selecting the input signal. 52