Canon 3200B002 User Manual - Page 10
Important Safety Instructions, Installation Location, Removing the Transportation Screw
View all Canon 3200B002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Chapter 1 Before You Start Using the Scanner 1. Important Safety Instructions To ensure the safe operation of this scanner, be sure to read the safety warnings and precautions described below. Installation Location The performance of this scanner is affected by the environment in which it is installed. Make sure that the location where the scanner is installed meets the following environmental requirements. ● Provide adequate space around the scanner for operation, maintenance, and ventilation. 3.9" (100 mm) or more ● Avoid exposing the scanner to rapid changes in temperature. If the room in which the scanner is installed is cold but rapidly heated, water droplets (condensation) may form inside the scanner. This may result in a noticeable degradation in scanning quality. The following conditions are recommended for optimal scanning quality: Room temperature: 15 °C to 30 °C (59 °F to 86 °F) Humidity: 25% to 80% RH ● Avoid installing the scanner near equipment that generates a magnetic field (e.g. speakers, televisions, or radios). 5.9" (150 mm) or more 27.6" (700 mm) or more 5.9" (150 mm) or more 36.2" (920 mm) or more ● Avoid installing the machine in direct sunlight. If this is unavoidable, use curtains to shade the scanner. ● Avoid locations with excessive dust or cigarette smoke. Dust and smoke can have negative effects on the inner parts of the scanner. ● Avoid warm or humid locations, such as in the vicinity of a water faucet, water heater, or humidifier, and avoid locations where the fumes from ammonia, paint thinner, or other volatile chemicals may be present. ● Avoid locations that are subject to vibration. Removing the Transportation Screw Three transportation screws are preinstalled at the factory to secure the scanner's optical unit and protect it from damage caused by vibration and shock during shipment. Make sure to remove these screws before using the scanner. 1-2