Canon BJC 6000 Service Manual - Page 132
Part 3: 3.6.1 Service mode, If you have replaced the EEPROM or the whole control board, you must
View all Canon BJC 6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Part 5: Maintenance BJC-6000 5. A step in the flowcharts may indicate more than one possible measure you can take. Make a test print for each measure you have taken to check that the problem is corrected. If the measure still fails to correct the problem, proceed to the next measure. Example 2 Replace the ink tank with a new one as measure 1, and make a test print to see if the problem is corrected. If not, replace the whole BJ cartridge as measure 2. Do print problems No appear? Yes END 1. Replace the ink tank 2. Replace the BJ cartridge 6. After concluding troubleshooting, ensure that all connectors and screws are fixed in place. CAUTION If you have replaced the EEPROM or the whole control board, you must perform EEPROM initialization and function settings. For details, refer to Part 3: 3.6.1 Service mode operations (page 3-18). 5-14