Canon C50FSi Network Video Recorder VK-64/VK-16 Administrator's Manual - Page 231
Restoration Procedure, Restore Data from Backup for Data Protection
UPC - 013803055962
View all Canon C50FSi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 231 highlights
Backup Scheme Restoration Procedure Restore Data from Backup for Data Protection The following explains how to reconstruct the Storage Server for the VK-64/VK-16 for maintenance or recovery from a failure. 1. Check that the PC hardware environment has been restored to the former state. Be sure to use the same folder organization as before. 2. Install the VK-64/VK-16. 3. After installation completes, stop the Storage Server from the [Storage Server Configuration] window. 4. Restore the VK-64/VK-16's configuration file to the former location. The default location is as follows: Configuration file path for OS other than Windows Vista/Windows Server 2008 :\Documents and Settings\All Users\Application Data\Canon\WebView\NVR\ Configuration file path for Windows Vista/Windows Server 2008 :\ProgramData\Canon\WebView\NVR\ 5. Restore the recorded video data file to the former location. The default location is as follows: :\WebView-NVR\videofiles 6. Restore the event data file to the former location. The default location is as follows: :\WebView-NVR\eventfiles 7. Start the Storage Server from the [Storage Server Configuration] window. 8. Check that the recording operation is performed correctly. Also check that restored video data is played back correctly. Note If the [Maximum retained history] setting is used in the [Storage Server Configuration] window and the restored video data contains data exceeding the retaining period, that data will be deleted when the Storage Server starts. 7-11