Canon C50FSi Network Video Recorder VK-64/VK-16 Administrator's Manual - Page 97

Register Camera Server and Set Recording Schedule Register Camera Server After preparing for Camera Server registration (i.e., creating a location and zone, and adding the Storage Server), you should register the Camera Server. You should register the desired Camera Server on the Storage Server if it has not been registered yet. Register the Camera Server (by Search) After registering the Camera Server, you can select the Camera Server from the Viewer screen. Tip z Up to 192 Camera Servers can be operated. Up to 4 camera servers can be operated with VK-Lite. z To connect to the Camera Server managed by another Storage Server, you should first add that Storage Server ( P. 4-14). Display the [Storage and Camera Server Summary] Windows Launch the VK Viewer and display the [Storage and Camera Server Summary] window. Find the Camera Server In the [Camera Summary] window, click [Find Camera Servers] which is located above the right-hand panel. The [Search Results] dialog appears and a list of detected Camera Servers will be displayed. Note z When you initiate the [Find Camera Servers] function, PC searches the Viewer's local subnet for all Camera Servers connected to it. Camera Servers on another subnet cannot be searched and should be added using [Add Camera Server] ( P. 4-18). z The camera names in the list are those specified by the Camera Server. See the Camera Server's User's Manual for more information on setting the name ("Camera Name" for VB-C500VD, VB-C500D, VB-C60, VB-C50i/ VB-C50iR, VB-C50FSi, VB-C50Fi and VB-C10/VB-C10R, "Device Name" for VB150, "VB-C300NA" or "VB-C300PA" for VB-C300). 4-17