Canon C50FSi Network Video Recorder VK-64/VK-16 Administrator's Manual - Page 257

Messages List Viewer Warning Messages Add Recording Schedule Preset Tour Settings Messages The audio transmission function of the camera is not available. Please confirm the camera settings. A setup of the stream for recording is applied only to the JPEG recording not more than maximum frame rate 10fps. It is applied to neither JPEG recording of 10 or more fps nor MPEG-4 recording. MPEG-4 recording with Preset Tour could consume disk space rapidly. Do you wish to continue? Attention: The current Preset Tour settings might require you to repair the Pan/Tilt machine soon. Please note that the repair of consumable mechanical parts such as the Pan/Tilt machine may not be covered by the guarantee. Recommended Preset Tour settings to reduce the machine load: z Change the Preset Tour duration within : at the [Start Time] and [End Time] setting. z Adjust the Preset Tour configuration so that the total amount of camera movement (angle/time) becomes small. z Set the pause time to the preset position longer than the Pause (sec) setting. Click the [Cancel] button to return to the setting screen. Cause The audio transmission function of the camera is disabled. You attempted to apply video recording stream settings to high rate JPEG video or MPEG-4 video. The data volume of MPEG-4 video becomes several times bigger if the video contains a lot of motion of subjects. You need attention when using Preset Tour together with MPEG-4 recording, as a whole image moves during Preset Tour. The configured settings exceed the endurance limit of 100,000 pans and tilts (300,000 for the VB-C60) within one year on the VB-C50i or VB-C300. Troubleshooting 9-15