Canon C50FSi Network Video Recorder VK-64/VK-16 Administrator's Manual - Page 265
Event Search, Extract Video
UPC - 013803055962
View all Canon C50FSi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 265 highlights
Messages List Camera Summary window Connect to Master Storage Server dialog, Connection Error dialog Edit Camera Server dialog Event Search dialog Extract Video dialog Folder Name dialog Messages The changes you are trying to save cannot be sent to the storage server () and will be lost. Are you sure you want to delete storage server ''? Are you sure you want to delete location ''? Are you sure you want to delete zone ''? Are you sure you want to delete camera server ''? Do you want to save your configuration changes? There has been an error saving the configuration on the Master Storage Server. The master storage server host name is invalid. Please specify a valid host name or IP address. The master storage server port is invalid. Please specify a value between 1 and 65535. Proceeding will delete any schedules associated with the following : . Click Yes to proceed, No to reconsider. There are no events to display The length of the extracted video may not exceed 1 hour. Could not save video because there was no data to record. Failed to extract the video after :: because two or more MPEG-4 tracks are included in the selected time period. You must enter a non blank name. Please check your settings and try again. Cause An error occurred while saving the settings in the Camera Summary window. An attempt was made to delete a Storage Server other than the Master Storage Server. An attempt was made to delete the location. An attempt was made to delete the zone. An attempt was made to delete the camera server. An attempt was made to close the [Camera Summary] window without saving the changes. An attempt was made to save the settings, however, saving the Master Storage Server settings failed. An attempt was made to connect with an invalid host name/IP address. An attempt was made to connect with an invalid port number. [OK] was pressed in the [Edit Camera Server] dialog when a change was made to the camera registered in the camera server. No events to be displayed in Event Search were found. An attempt was made to configure the time using a value longer than 1 hour. The recorded video at the specified time cannot be read. You attempted to use [Extract Video] to save recorded video for a time range that spans two or more MPEG-4 recording schedules. An attempt was made to add a layout folder without entering the name. Troubleshooting 9-23