Canon C50FSi Network Video Recorder VK-64/VK-16 Administrator's Manual - Page 94
Add Storage Server, Display [Storage and Camera Server Summary] Windows
UPC - 013803055962
View all Canon C50FSi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Add Storage Server If you are using multiple Storage Servers, add each Storage Server as directed below. You need not perform these steps if you are using only one Storage Server and that Storage Server has already been added. By adding the Storage Server, you can select the Camera Servers managed by each Storage Server from the Viewer screen. Note If you are using the Viewer only, the [Storage Servers] tab is not shown and you cannot add the Storage Server. Tip You can operate VK-64 with up to 10 Storage Servers, and up to 192 Camera Servers can be operated. Display [Storage and Camera Server Summary] Windows Launch the VK Viewer and display the [Storage and Camera Server Summary] window. Add Storage Server 1. In the [Storage and Camera Server Summary], select the [Storage Servers] tab. 2. Click [Add Storage Server] to bring up the [Add Storage Server] dialog. 3. Enter connection settings and click [OK]. Note z Do not add the same Storage Server more than once. z If you add a Storage Server with a different configuration (such as one managed by another Master Storage Server), your original Locations and Zones will be invalid. z You need to change Windows settings of a storage server to be added before if you are using Windows XP SP2 or Windows Server 2003. See "Notes on Operating Environment" ( P. 1-12~P. 1-16). z Do not change the port number. 4-14