Canon DR-2080C Startup Guide - Page 54
jewelry, or other objects that could be pulled into the unit. Injury could - adjustment page
View all Canon DR-2080C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
6. Adjust the paper side guides. Note Before starting a scan, make sure that the document is loaded in the scanner correctly. Scanning a curled document or a creased document can damage the document. 7. Perform the scanning operation in accordance with the normal operating procedure for your application software. Notice ● If the paper feed operation stops due to a system error or a paper jam while the scanner is scanning, resolve the problem, make sure that the scanned image of the last page that was fed has been stored, and then resume the scanning operation. ● When you finish scanning, lower the paper feed extension plate, remove the paper side guide adapters, and finally close the paper feed tray cover and top cover to protect the scanner against possible damage. Note ● When operating this unit, avoid wearing loose-fitting clothing, dangling jewelry, or other objects that could be pulled into the unit. Injury could result. Be especially careful if you are wearing a necktie or have long hair. In the event that an object or clothing is caught in the unit, turn the power off immediately. ● Depending on the type of document you are using, the unit may make a strange noise when documents are fed. This is not a malfunction. 52 Using the Scanner