Canon DR-2080C Startup Guide - Page 8

● Avoid unstable surfaces and locations subject to vibration. ● Avoid locations that are subject to rapid temperature changes. Condensation inside of the unit can result in inferior image quality. Use this unit under the following environmental conditions: Temperature: 10 degree C to 32.5 degree C Humidity: 20% to 80% RH ● Avoid locating the unit near equipment that generates electromagnetic fields, including speakers, televisions, and radios. About the AC adapter ● Connect only to a power outlet of the rated voltage and power supply frequency. (Either 120 V, 60 Hz or 220-240 V, 50/60 Hz depending on your region.) ● Do not connect to power outlets with other electrical devices. Also, when connecting via an extension cord, check the amperage rating. ● Disassembling and/or reassembling the AC adapter is extremely dangerous and should not be attempted under any circumstances. ● Do not place heavy objects on the AC adapter or power cord. Do not place the adapter or cords in an area where they are likely to be stepped on. ● Do not use the power cord while it is still bundled. ● Never pull directly on the power cord. To remove the plug from the outlet, grasp the plug directly and remove. ● Keep the area around the power plug clear of articles so that the power plug can be disconnected in an emergency. ● Use only the AC adapter provided with the product. Also, do not use the scanner's AC adapter with any other product. 120 V Model: MH3-2053 or MG1-3607 220-240 V Model: MH3-2054 or MG1-3607 ● If unclear about the AC adapter, see your product dealer or the service department for further information. Moving the Scanner ● To avoid dropping or damaging the scanner, always carry it with two hands. The scanner weighs approximately 2.3 kilograms. ● Make sure to disconnect the interface cable and AC adapter. If the scanner is transported with these items plugged in, the plugs and connectors may be damaged due to physical shock or concussion. 6 Before Using the Unit