Canon DR-2080C Startup Guide - Page 68
The scanner is not on. - troubleshooting
![]() |
View all Canon DR-2080C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Cause Action Cause Action Cause Action Cause Action Cause Action The scanner's SCSI ID is identical to the SCSI ID of another device. Check the SCSI IDs of all SCSI devices connected to the system and set a unique SCSI ID for the scanner. The terminator is not set correctly. Turn the PC and the scanner off once. Then, turn the scanner on first and the PC on again. (→ P.26) The PC was turned on before the scanner. Shut down both the PC and the scanner, and then turn the scanner back on, followed by the PC. The scanner is not on. Refer to the previous section, "The scanner does not turn on," and check to see if the scanner is on. If the scanner is not on, shut down the PC, then turn the scanner on first, and then the PC. The SCSI board is not compatible with the scanner. Use a recommended SCSI board. (→ P.23) 66 Troubleshooting
![](/manual_guide/products/canon-dr2080c-startup-guide-7525b8b/68.png)