Canon DR 5020 Instruction Manual - Page 46

Set the paper guides for the width of the document you are going

Page 46 highlights

3.2 Document Feeding and scanning 5 Set the paper guides for the width of the document you are going to scan. 6 Instruct scanning in the application. The Start key changes color from red to green. 3 7 Press the Start key. 8 The document tray rises, and scanning begins. When scanning of all pages in the document ends, the paper tray is lowered. MEMO If paper feed stops during scanning due to a system error or paper jam, make sure that the last page of the original that was being fed in was recorded properly before continuing scanning. 9 If there are more pages in the document to scan, load the document and press the Start key. To end scanning, press the Stop key. 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95

45
3
5
Set the paper guides for the width of the document you are going
to scan.
6
Instruct scanning in the application.
The Start key changes color from red to green.
7
Press the Start key.
8
The document tray rises, and scanning begins. When scanning of
all pages in the document ends, the paper tray is lowered.
If paper feed stops during scanning due to a system error or paper jam, make sure
that the last page of the original that was being fed in was recorded properly before
continuing scanning.
9
If there are more pages in the document to scan, load the
document and press the Start key. To end scanning, press the Stop
key.
3.2
Document Feeding and scanning
MEMO