Canon EOS Rebel SL1 18-55mm IS STM Kit Instruction Manual - Page 217
Setting the Image Review Time, Setting the Auto Power-off Time, Even when [Disable] is set
View all Canon EOS Rebel SL1 18-55mm IS STM Kit manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
Handy Features 3 Setting the Image Review Time You can set how long the image is displayed on the LCD monitor immediately after capture. If [Off] is set, the image will not be displayed immediately after image capture. If [Hold] is set, the image review will be displayed up until the [Auto power off] time. During image review, if you operate any camera controls such as pressing the shutter button halfway, the image review will end. Under the [z1] tab, select [Image review], then press . Select the desired setting, then press . 3 Setting the Auto Power-off Time To save battery power, the camera turns off automatically after the set time of idle operation elapses. You can set this auto power-off time. When the camera has turned off due to auto power off, you can turn it on again by pressing the shutter button halfway or pressing any of the following buttons: , , , , etc. If [Disable] is set, either turn off the camera or press the button to turn off the LCD monitor to save battery power. Even when [Disable] is set, if the camera is not used for 30 min., the LCD monitor will turn off automatically. To turn on the LCD monitor again, press the button. Under the [52] tab, select [Auto power off], then press . Select the desired setting, then press . 217