Canon EOS Rebel SL1 18-55mm IS STM Kit Instruction Manual - Page 30
Charging the Battery, Remove the protective cover., Attach the battery., For LC-E12
View all Canon EOS Rebel SL1 18-55mm IS STM Kit manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Charging the Battery 1 Remove the protective cover. 2 Attach the battery. As shown in the illustration, attach the battery securely to the charger. To detach the battery, follow the above procedure in reverse. LC-E12 LC-E12E 3 Recharge the battery. For LC-E12 As shown by the arrow, flip out the battery charger's prongs and insert the prongs into a power outlet. For LC-E12E Connect the power cord to the charger and insert the plug into a power outlet. X Recharging starts automatically and the charge lamp lights up in orange. X When the battery is fully recharged, the full-charge lamp will light up in green. It takes approx. 2 hours to fully recharge a completely exhausted battery at room temperature (23°C / 73°F). The time required to recharge the battery will vary greatly depending on the ambient temperature and the battery's remaining capacity. For safety reasons, recharging in low temperatures (5°C - 10°C / 41°F - 50°F) will take longer (up to approx. 4 hours). 30