Canon EOS Rebel SL1 18-55mm IS STM Kit Instruction Manual - Page 32
Installing and Removing the Battery and Card, Open the cover., Insert the battery.
View all Canon EOS Rebel SL1 18-55mm IS STM Kit manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Installing and Removing the Battery and Card Load a fully charged Battery Pack LP-E12 into the camera. The camera can use an SD, SDHC, or SDXC memory card (sold separately). UHS-I Speed Class SDHC and SDXC memory cards can also be used. The captured images are recorded onto the card. Make sure the card's write-protect switch is set upward to enable writing/erasing. Installing the Battery and Card 1 Open the cover. Slide the lever as shown by the arrows and open the cover. Write-protect switch 2 Insert the battery. Insert the end with the battery contacts. Insert the battery until it locks in place. 3 Insert the card. As shown by the illustration, face the card's label side toward the back of the camera and insert it until it clicks in place. 4 Close the cover. Press the cover until it snaps shut. When you set the power switch to , the number of possible shots (p.36) will be displayed on the LCD monitor. 32