Canon EOS Rebel SL1 18-55mm IS STM Kit Instruction Manual - Page 41
While pressing the lens release, button, turn the lens as shown by, the arrows., Zooming
View all Canon EOS Rebel SL1 18-55mm IS STM Kit manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Attaching and Detaching a Lens Zooming Detaching the Lens To zoom, turn the zoom ring on the lens with your fingers. If you want to zoom, do it before focusing. Turning the zoom ring after achieving focus may throw off the focus. While pressing the lens release button, turn the lens as shown by the arrows. Turn the lens until it stops, then detach it. Attach the rear lens cap to the detached lens. Do not look at the sun directly through any lens. Doing so may cause loss of vision. When attaching or detaching a lens, set the camera's power switch to . If the front part (focusing ring) of the lens rotates during autofocusing, do not touch the rotating part. If you use a TS-E lens, certain shift and rotation functions may be restricted, and attaching or detaching the lens may also be restricted. Image Conversion Factor Since the image sensor size is smaller than the 35mm film format, it will look like the lens focal length is increased by approx. 1.6x. Image sensor size (Approx.) (22.3 x 14.9 mm / 0.88 x 0.59 in.) 35mm image size (36 x 24 mm / 1.42 x 0.94 in.) 41