Canon LV-7265 LV User's Manual - Page 24
Making Connections - projector manual
View all Canon LV-7265 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
2. Installation and Connections ❷ Making Connections NOTE: When using with a notebook PC, be sure to connect the projector and notebook PC while the projector is in standby mode and before turning on the power to the notebook PC. In most cases the output signal from the notebook PC is not turned on unless connected to the projector before being powered up. * If the screen goes blank while using your remote control, it may be the result of the computer's screen-saver or power man- agement software. Enabling the computer's external display Displaying an image on the notebook PC's screen does not necessarily mean it outputs a signal to the projector. When using a PC compatible laptop, a combination of function keys will enable/disable the external display. Usually, the combination of the 'Fn" key along with one of the 12 function keys gets the external display to come on or off. For more details, refer to your computer's owner's manual. Connecting Your PC or Macintosh Computer (LV-7365/LV-7265) NOTE: The ANALOG IN- 1 connector supports Plug & Play (DDC2). DIGITAL IN/ ANALOG IN-2 S-VIDEO IN VIDEO IN L SERVICE PORT R AUDIO IN DIGITAL IN / ANALOG IN-2 AUDIO IN AUDIO IN ANALOG IN-1 ANALOG IN-1 AUDIO OUT Use the optional DVI digital cable (LV-CA29) to connect the DIGITAL IN /ANALO G IN-2 connector for a computer with DVI/DVI-I output. DVI digital cable (Optional: LV-CA29) VGA cable (supplied) To mini D-Sub 15-pin connector on the projector. It is recommended that you use a commercially available distribution amplifier if connecting a signal cable longer than the supplied one. NOTE: For older Macintosh, use a PHONE commercially available pin adapter (not supplied) to connect to your Audio cable (not supplied) Mac's video port. PHONE IBM PC or Compatibles (Desktop type) or Macintosh (Desktop type) IBM VGA or Compatibles (Notebook type) or Macintosh (Notebook type) NOTE: Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor turns down the sound. NOTE: An image may not be displayed correctly when a Video or S-Video source is played back via a commercially available scan converter. This is because the projector will process a video signal as a computer signal at the default setting. In that case, do the following. * When an image is displayed with the lower and upper black portion of the screen or a dark image is not displayed correctly: Project an image to fill the screen and then press the AUTO PC button on the remote control or the projector cabinet. 15