Canon LV-7265 LV User's Manual - Page 27
Connecting Your PC or Macintosh Computer LV-7260/LV-X7
View all Canon LV-7265 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
2. Installation and Connections Connecting Your PC or Macintosh Computer (LV-7260/LV-X7) NOTE: The ANALOG IN connector supports Plug & Play (DDC2). AUDIO IN S-VIDEO IN VIDEO IN L SERVICE PORT R AUDIO IN ANALOG IN ANALOG IN Audio cable (not supplied) PHONE VGA cable (supplied) To mini D-Sub 15-pin connector on the projector. It is recommended that you use a commercially available distribution amplifier if connecting a signal cable longer than the supplied one. NOTE: For older Macintosh, use a commercially available pin adapter (not supplied) to connect to your Mac's video port. IBM PC or Compatibles (Desktop type) or Macintosh (Desktop type) PHONE IBM VGA or Compatibles (Notebook type) or Macintosh (Notebook type) NOTE: Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor turns down the sound. NOTE: An image may not be displayed correctly when a Video or S-Video source is played back via a commercially available scan converter. This is because the projector will process a video signal as a computer signal at the default setting. In that case, do the following. • When an image is displayed with the lower and upper black portion of the screen or a dark image is not displayed correctly: Project an image to fill the screen and then press the AUTO PC button on the remote control or the projector cabinet. 18