Canon LV-X300 User Manual - Page 38
Adjusting Tint, Adjusting Sharpness, Adjusting BrilliantColor™, Selecting a Color Temperature
View all Canon LV-X300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Lower setting produces less saturated colors. If the setting is too high, colors on the image will be overpowering, which makes the image unrealistic. Adjusting Tint Highlight Tint in the PICTURE menu and adjust the values by pressing / on the projector or remote control. The higher the value, the more reddish the picture becomes. The lower the value, the more greenish the picture becomes. Adjusting Sharpness Highlight Sharpness in the PICTURE menu and adjust the values by pressing / on the projector or remote control. The higher the value, the sharper the picture becomes. The lower the value, the softer the picture becomes. Adjusting BrilliantColor™ Highlight BrilliantColor™ in the PICTURE menu and select by pressing / on the projector or remote control. This feature utilizes a new color-processing algorithm and system level enhancements to enable higher brightness while providing truer, more vibrant colors in picture. It enables a greater than 50% brightness increase in mid-tone images, which are common in video and natural scenes, so the projector reproduces images in realistic and true colors. If you prefer images with that quality, select On. If you don't need it, select Off. On is the default and recommended selection for this projector. When Off is selected, the Color Temperature function and 6-axis Color Adjust are not available. Selecting a Color Temperature Highlight Color Temperature in the PICTURE menu and adjust the values by pressing / on the projector or remote control. The options available for color temperature* settings vary according to the signal type selected. 1. High: The image becomes tinted with blue. (cold colors). 2. Middle: The image uses standard colors. 3. Low: The image becomes tinted with red. (warm colors). *About color temperatures: There are many different shades that are considered to be "white" for various purposes. One of the common methods of representing white color is known as the "color temperature". A white color with a low color temperature appears to be reddish white. A white color with a high color temperature appears to have more blue in it. 6-axis Color Adjust In most installation situations, color management will not be necessary, such as in classroom, meeting room, or lounge room situations where lights remain on, or where building external windows allow daylight into the room. Only in permanent installations with controlled lighting levels such as boardrooms, lecture theaters, or home theaters, should color management be considered. Color management provides fine color control adjustment to allow for more accurate color reproduction, should you require it. Proper color management can only be achieved under controlled and reproducible viewing conditions. You will need to use a colorimeter (color light meter), and provide a set of suitable source images to measure color reproduction. These tools are not provided with the projector, however, your projector supplier should be able to provide you with suitable guidance, or even an experienced professional installer. The Color Management provides six sets (RGBCMY) of colors to be adjusted. When you select each color, you can independently adjust its range and saturation according to your preference. If you have purchased a test disc which contains various color test patterns and can be used to test the color presentation on monitors, TVs, projectors, etc. You can project any image from the disc on the screen and enter the 6-axis Color Adjust menu to make adjustments. 38