Canon LV-X300 User Manual - Page 51

Using the Network Function when the projector is in standby mode, Glossary, Standby LAN

Get Canon LV-X300 PDF manuals and user guides View all Canon LV-X300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

ENGLISH • During standby • During input source switching • During command processing • During AUTO PC execution • Before the splash screen disappears after the power is turned on. • Use 1 computer to control/monitor 1 projector. • For how to control/monitor using PJLink™, see the operation manual of the PJLink™ application you use. • When you monitor the projector's operating state using this function by issuing inquiry commands successively, issue an inquiry command after receiving the response to the previous inquiry command from the projector. Using the Network Function when the projector is in standby mode When the Standby LAN in the SYSTEM SETUP: Advanced > LAN Settings menu is activated, the projector is able to provide the network function when it is in standby mode. Glossary For more detail of the glossary below, refer to the technical book that is commercially available. Term DHCP IP Address Subnet Mask Default Gateway Description Abbreviation for Dynamic Host Configuration Protocol. This protocol automatically assigns IP Address to networked devices. Numerical address to identify networked computers. A numeric value to define the number of bits used for a network address of a divided network (or subnet) in an IP Address. A server (or router) to communicate across networks (subnets) that are divided by Subnet Mask. 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
51
ENGLISH
•
During standby
•
During input source switching
•
During command processing
•
During AUTO PC execution
•
Before the splash screen disappears after the power is turned on.
•
Use 1 computer to control/monitor 1 projector.
•
For how to control/monitor using PJLink™, see the operation manual of the PJLink™
application you use.
•
When you monitor the projector's operating state using this function by issuing inquiry
commands successively, issue an inquiry command after receiving the response to the
previous inquiry command from the projector.
Using the Network Function when the projector is in standby mode
When the
Standby LAN
in the
SYSTEM SETUP: Advanced
>
LAN Settings
menu is activated, the
projector is able to provide the network function when it is in standby mode.
Glossary
For more detail of the glossary below, refer to the technical book that is commercially available.
Term
Description
DHCP
Abbreviation for Dynamic Host Configuration Protocol. This protocol
automatically assigns IP Address to networked devices.
IP Address
Numerical address to identify networked computers.
Subnet Mask
A numeric value to define the number of bits used for a network
address of a divided network (or subnet) in an IP Address.
Default Gateway
A server (or router) to communicate across networks (subnets) that are
divided by Subnet Mask.