Canon LV-X300 User Manual - Page 40
Setting the presentation timer, To cancel the timer, perform the following steps., Using the TIMER key
View all Canon LV-X300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Setting the presentation timer The presentation timer can indicate the presentation time on the screen to help you achieve better time management when giving presentations. Follow these steps to utilize this function: 1. Go to the SYSTEM SETUP: Basic > Presentation Timer menu and press OK/IMAGE to display the Presentation Timer page. 2. Press to highlight Preset Time and decide the timer period by pressing / . The length of time can be set from 1 to 5 minutes in 1-minute increments and 5 to 240 minutes in 5-minute increments. If the timer is already on, the timer will restart whenever the Preset Time is reset. 3. Press to highlight Timer Display and choose if you want the timer to show up on the screen by pressing / . Selection Description Always 1 min/2 min/3 min Never Displays the timer on screen throughout the presentation time. Displays the timer on screen in the last 1/2/3 minute(s). Hides the timer throughout the presentation time. 4. Press to highlight Position and set the timer position by pressing / .The reminder position can be chosen from the upper-left, lower-left, upper-right to the lower-right corner of the screen. 5. Press to highlight Counting Direction and select your desired counting direction by pressing / . Selection Description Count Up Count Down Increases from 1 to the preset time. Decrease from the preset time to 1. 6. Press to highlight Sound Reminder and decide if you want to activate sound reminder by pressing / . If you select On, a double beep sound will be heard at the last 30 seconds of counting down/up, and a triple beep sound will be produced when the timer is up. 7. To activate the presentation timer, press and press / to select On and press OK/IMAGE. 8. A confirmation message is displayed. Highlight Yes and press OK/IMAGE to confirm. You will see the message "Timer is On!" appearing on the screen. The timer starts counting once the timer is turned on. If you switch input signal or press AUTO PC when the timer is on, the timer will be stopped. To cancel the timer, perform the following steps. 1. Go back to the Presentation Timer page. 2. Press and press / to highlight Off and press OK/IMAGE. A confirmation message is displayed. 3. Highlight Yes and press OK/IMAGE to confirm. You will see the message "Timer is Off!" appearing on the screen. Using the TIMER key TIMER is a multi-functional key. • If the presentation timer is off, pressing this key displays a confirmation message. You can decide whether to activate the timer or not by following the on-screen instruction. • If the timer is already on, pressing this key displays a confirmation message. You can decide whether to restart, continue or turn off the timer by following the on-screen instruction. 40