Canon LV-X300 User Manual - Page 42
Adjusting the sound, Personalizing the projector menu display, Shutting down the projector
![]() |
View all Canon LV-X300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Adjusting the sound The sound adjustments made as below will have an effect on the projector speaker. Be sure you have made a correct connection to the projector audio input. See "Connection" on page 23 for how the audio input is connected. Muting the sound To temporarily turn off the sound, press MUTE on the remote control, or: 1. Press MENU and then press / until the SYSTEM SETUP: Advanced menu is highlighted. 2. Press to highlight Audio Settings and press OK/IMAGE. The Audio Settings page is displayed. 3. Highlight Mute and press / to select On. Adjusting the sound level To adjust the sound level, press VOL +/- on the remote control, or: 1. Repeat steps 1-2 above. 2. Press to highlight Volume and press / to select a desired sound level. Personalizing the projector menu display The On-Screen Display (OSD) menus can be set according to your preferences. The following settings do not affect the projection settings, operation, or performance. • Menu Display Time in the SYSTEM SETUP: Advanced > Menu Settings menu sets the length of time the OSD will remain active after your last key press. The time length ranges from 5 to 30 seconds in 5-second increments. Use / to select a suitable time frame. • Menu Position in the SYSTEM SETUP: Advanced > Menu Settings menu sets the OSD position in five locations. Use / to select a preferred position. • Language in the SYSTEM SETUP: Basic menu sets your familiar language for the OSD menus. See "Using the menus" on page 29 for details. • Splash Screen in the SYSTEM SETUP: Basic menu sets a preferred logo screen to be displayed during projector start-up. Use / to select a screen. Shutting down the projector 1. Press II POWER and a confirmation message displays prompting you. If you don't respond in a few seconds, the message will disappear. 2. Press II POWER a second time. The POWER indicator light flashes orange, the projection lamp shuts down, and the fans will continue to run for approximately 90 seconds to cool down the projector. 3. Once the cooling process finishes, the POWER indicator light is a steady orange and fans stop. 4. Disconnect the power cord from the wall socket if the projector will not be used in an extended period of time. • To protect the lamp, we suggest you not to operate the projector during the cooling process. • To shorten the cooling time, you can also activate the Quick Cooling function. See "Quick Cooling" on page 57 for details. • Do not unplug the power cord before the projector shutdown sequence is complete or during the 90-second cooling down process. 42
![](/manual_guide/products/canon-lvs300-user-manual-12432dc/42.png)