Canon LV-X300 User Manual - Page 48
the password function., iv. Once set
View all Canon LV-X300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
iv. Once set, access to the remote network operation page on this projector has been passwordprotected. To enable this function, check the box in front of "Enable" and type in your desired password in the New Password column and confirm the new password by re-entering the new password at the Confirm column. To disable password protection, uncheck the box. v. Once set, access to the Tools page has been password-protected. Refer to step iv for how to use the password function. vi. Press Exit to go back to the remote network operation page. • After making the adjustments, press the Send button and the data will be saved in the projector. • Once the password is set, the Log Out button will display beside the Tools button. • Write down your selected password in advance or right after the password is entered so that it is available to you should you ever forget it. • If you did not write down your password, and you absolutely do not remember it you can reset the password by following procedure. - Open log in screen of e-Control. by your web browser. - Long press MENU and Right on the projector for 3 seconds. - Now the password has been reset. • The software is available in English language. • When DHCP is turned on, there is a possibility of stopping the webpage connection. If this happens, please check the new IP address of the projector and enter the new address to connect again. 4. The Info page displays the information and status of this projector. i i ii iii i. The information you entered in the Tools page will display here and these columns are empty when you use e-Control™ for the first time. ii. When the projector is in abnormal conditions, the following information will display. 48