Canon Microfilm Scanner 800II MS-800II Instruction Manual - Page 16

Before You Begin... !£ AF (Auto Focus) key Used to automatically focus the image. !¢ ZOOM (enlarge/reduce) key FOCUS key !§ ROTATE key !¶ Control knob Used to enlarge or reduce the size of the image projected on the screen. Press the ZOOM key and then use the control knob to enlarge and reduce the image on the screen. Adjusts the focus of the image projected on the screen. Press the FOCUS button and then turn the control knob until the image on the screen is in focus. Rotates the image projected on the screen. Press the ROTATE key and then turn the control knob. The image rotates to match the rotation of the control knob. Turn this knob to adjust the image after the ZOOM, FOCUS or ROTATE key has been pressed. Operation Keyboard (optional) 1 24 3 22 P1 P2 P3 P4 19 2 24 P 2 P 3 P 4 18 12 6 20 7 8 9 23 11 10 21 !• Image adjust selection key !ª Image adjust mode indicators @º Image adjust control dial @¡ Rotate key @™ Film control knob @£ RESET key @¢ Paper Select key Disabled key Selects the image adjustment mode (zoom, focus or rotate). These indicators show the image adjustment mode selected using key !•. After selecting the image adjustment mode, turn this dial to adjust the image. Rotates the image 90° clockwise or counterclockwise. When a motorized carrier is installed, this knob feeds through the film. Turn the knob to the right to advance the film and to the left to rewind the film. (Note that this knob cannot be used with the FS Controller I.) Restores the default settings for each setting mode. Selects the paper cassette or multipurpose tray in ReaderPrinter mode. Not used by the Microfilm Scanner 800II. - 14 - $&*& Page 14 07.5.14, 11:06 "EPCF
1BHF.BLFS
+11$