Canon Microfilm Scanner 800II MS-800II Instruction Manual - Page 37
Selecting the Scan Size, Setting the Scanning Position
![]() |
View all Canon Microfilm Scanner 800II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Using the Scanner A3/A4 A4 R A4 A4 A4 R A3 A3/A4 A4 R A4 A4 A4 R A3 A3/A4 A4 R A4 A4 A4 R A3 Selecting the Scan Size If image size detection is set to ON in the application program in Scanner mode, select the scan size. Press the Scan Size key on the operation panel and set the scan size. Note If image size detection is set to OFF in the application software or trimming/border removal is selected, the Scan Size selection function light switches off and the function is disabled. Setting the Scanning Position If an image is too big, you can select a specific area to be scanned by pressing the Scanning Position key. The indicator for the currently selected mode lights when the key is pressed and the setting changes each time the key is pressed. Press the key until the desired mode lights. ( ) The central area of the screen is scanned. ( ) The left side of the screen is scanned. ( ) The left and right sides of the screen are scanned as 2 consecutive images. Because the left side is scanned first, it is not necessary to reverse the sequence of printed pages. Note If trimming is selected in Scanner mode, the center ( ) and left edge ( ) reference positions cannot be selected. $&*& Page 35 - 35 - 07.5.14, 11:06 "EPCF1BHF.BLFS+11$
![](/manual_guide/products/canon-microfilm-scanner-800ii-ms800ii-instruction-manual-6b86b97/37.png)