Canon Microfilm Scanner 800II MS-800II Instruction Manual - Page 32
Using the Scanner
View all Canon Microfilm Scanner 800II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Using the Scanner Using the Scanner $&*& Adjusting the Image The instructions below describe how to adjust the image projected onto the scanner screen. Note The image can be adjusted using the operation panel below the screen or the optional operation keyboard. AF key Control knob M1 M2 AF M3 ZOOM FOCUS ROTATE FOCUS key Focusing the Image The image projected on the screen can be focused either automatically (Auto Focus) or manually. Auto Focus 1 Check that the AF key on the operation panel is lit. • Auto Focus does not function when the AF key is unlit. 2 Press the AF key. • If you press the AF key when it is lit, the image sensor moves to automatically adjust the focus before returning to its original position. • The AF key flashes during auto focusing. Note AF operates more easily when the image projected on the screen is rotated slightly so that it appears skewed. AF operates more successfully when the image projected on the screen is rotated slightly so that it appears skewed. IMPORTANT AF may not operate normally for some images. In this event, focus the image manually or retry auto focusing. Image adjust mode indicators Image adjustment selection key image adjustment control dial (Operation keyboard) Manual Focus 1 Press the FOCUS key. 2 Turn the image adjustment control knob left or right to focus the image. Note To adjust the focus using the operation keyboard, press the image adjustment selection key to select the mode (the ZOOM, FOCUS or ROTATE mode indicator lights) and then use the image adjustment control dial to adjust the image. - 30 - Page 30 07.5.14, 11:06 "EPCF1BHF.BLFS+11$