Canon Microfilm Scanner 800II MS-800II Instruction Manual - Page 34

Using the Scanner Printing or Scanning the Image In Reader Printer mode, the image projected on the scanner screen can be printed directly to a FilePrint 470 printer connected to the scanner. In Scanner mode, the image can be downloaded as image data to a computer connected to the scanner and then printed on a printer connected to the computer. The actual scan settings and the procedure for the scanning mode differ depending on your application program. For this reason, the descriptions given here cover only the scanning modes that can be set from the scanner's operation panel. Refer to the user manuals for your application software for information on the scan settings and the procedure for downloading the image. Selecting the Polarity This setting selects the film polarity (positive or negative). Press the Negative/Positive key on the operation panel or the optional operation keyboard to select the film polarity. ( ) Negative Positive output from negative film ( ) Positive Positive output from positive film ( A ) Auto The scanner automatically detects the film type and generates positive output. When the Auto setting is selected, the Negative or Positive indicator blinks during scanning to indicate the film type. Notes • If the black-white ratio in the screen is almost even, if the image border is small, or if you have used trimming to select an area at the edge of the image, the scanner may be unable to automatically detect the film type. In this event, select the film polarity manually. • If you select Positive, border removal (➜ P.36) and automatic skew correction (➜ P.39) are disabled. $&*& Page 32 - 32 - 07.5.14, 11:06 "EPCF
1BHF.BLFS
+11$