Canon Microfilm Scanner 800II MS-800II Instruction Manual - Page 24
Switching On, Switching Off
![]() |
View all Canon Microfilm Scanner 800II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Before You Begin... Switching On Use the procedure below to switch the scanner on. 1 Press the "|" side of the power switch to turn on the main unit. When the main unit is switched on, the Start key glows red and the scanner switches. (In ReaderPrinter mode: Green. In Scanner mode: Red) 2 Switch on the computer and printer. IMPORTANT • Switch on the scanner before you switch on the computer. • The USB port on this scanner uses a SCSI-USB converter to convert the SCSI port to a USB port. Even when connecting via a USB port, switch on the scanner before you switch on the computer. Switching Off 1 Switch off the computer and printer. 2 Press the " " side of the power switch to switch the scanner off. IMPORTANT • Switch off the computer first before switching off the scanner. • The USB port on this scanner uses a SCSI-USB converter to convert the SCSI port to a USB port. Do not switch off the scanner while the computer is on. Do not plug in or unplug the USB cable when the computer is on. • If the scanner will not be used for a lengthy period, unplug the power cord as a safety measure. $&*& Page 22 - 22 - 07.5.14, 11:06 "EPCF1BHF.BLFS+11$
![](/manual_guide/products/canon-microfilm-scanner-800ii-ms800ii-instruction-manual-6b86b97/24.png)