Canon PIXMA MP460 User's Guide - Page 115
Problems With Scanning - scanner driver
View all Canon PIXMA MP460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Problems With Scanning Scanner Won't Work Cause Machine is not identified. Action Restart the computer. It may solve the problem. Then confirm that the machine is identified. ScanGear Won't Start Cause Scanner driver (ScanGear) is not installed. Action Set the "Setup CD-ROM" in your computer and install ScanGear. Machine may not be selected. Select your machine following the directions in Scanning with ScanGear in Initiating a Scan. The application program used does Start ScanGear from within a TWAIN-compatible program. not support calling up ScanGear. An error message appears and the ScanGear window fails to appear. z Reattach the USB cable. Only use a certified USB 2.0 Hi-Speed cable. z Attach the USB cable to a different USB port on the computer itself (not a hub). z If a USB hub is used for the connection, do not use it. Attach the cable directly to a USB port on the computer itself (not the hub). z The machine may not be selected. Select your machine following the directions in Scanning with ScanGear in Initiating a Scan. z Be sure to start ScanGear from within a TWAIN-compatible program. Computer Stops Operating During Scanning Cause Output Resolution set too high. Insufficient hard disk space. Multiple devices connected to the USB port. Action Reboot the computer, lower the Output Resolution and rescan. (See the Scanning Guide) z When scanning large originals at a high resolution, an error may occur if there is insufficient hard disk space. Check that the hard disk has sufficient free space, and rescan. z When scanning large originals at a high resolution, the progress bar may stay at 0% depending on your computer. Set a smaller scanning area or a lower resolution, and rescan. Disconnect all other devices but the machine from the port. Chapter 11 Troubleshooting 113