Canon PIXMA SELPHY CP510 SELPHY CP710/CP510 User Guide - Page 61

Printing stopped midway. The printer is not correctly connected to the camera. z Connect the cable correctly (p. 31). The printer's power button lights red without the camera's LCD monitor displaying any error message. There is a malfunction in the printer. z Remove the paper from the paper-handling slot and take up any slack in the ink sheet. Turn the printer's power off and turn it on again. Print quality is not good. You are not using the correct paper type. Paper is loaded with the wrong side up. The ink sheet or paper is dirty. Condensation has formed inside the printer. z Use the designated paper type. z Load the paper correctly (p. 28). z Use a clean ink sheet and clean paper. z Wait for condensation to evaporate (p. 15). Printed images are distorted. The printer is too close to a TV, video game machine, or other electromagnetic source. z Move the printer so that it is at least 1 meter (3.3 ft.) away from the electromagnetic source. The printer is too close to a stereo speaker, large motor, or other strong magnetic source. z Move the printer away from the strong magnetic source. There is not enough ink left for the allotted sheets in the set. You turned the printer's z Please avoid turning the printer's power on and off power on and off repeatedly. needlessly. You pulled on the ink sheet. z Do not pull on the ink sheet by force. You tore or bent the paper's perforated edges before printing. z Do not tear or bend the paper's perforated edges. You removed the ink cassette when paper run out while the printer was printing more than one sheet of paper. z Load paper into the paper cassette without removing the ink cassette. Nothing happens when the camera's , or SET button is pressed. The printer has overheated. z Wait for the printer to cool down. Printing is in progress. z Wait for the printer to finish printing. 59