Canon PIXMA SELPHY CP510 SELPHY CP710/CP510 User Guide - Page 63
Error Messages
View all Canon PIXMA SELPHY CP510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Error Messages The power button of the printer lights or blinks red if any error occurs during printing. If a problem occurs while the printer is connected to the camera, the camera's LCD monitor may display an error message. On the CP710: A screen indicating the error type is displayed also on the printer's LCD monitor. See the corresponding solution. On the CP510: Check the camera's LCD monitor, and see the corresponding solution. CP710's LCD Monitor Camera's LCD Monitor No paper z Check that the paper cassette is correctly installed. z Make sure that the paper cassette contains paper. z If paper is not feeding correctly, remove the paper cassette, and manually remove any paper remaining in the printer. Incompatible paper size z Wrong paper size is loaded in the paper cassette. Use the designated paper size. Paper Jam z Turn the power off and turn it on again. If the printer fails to eject the paper, contact a Canon Customer Support help desk for assistance. No Display Paper has been changed z Paper was changed after the print menu was displayed. Change back to the original paper size or change the print settings. No Ink z Load an ink cassette if it is not in the printer. z If the ink cassette is out of ink, load a new ink cassette. Paper and ink do not match z Check the ink/paper sets, and use the right ink/paper set. Ink error or Ink cassette error z Remove the ink cassette from the printer, take up the slack in the ink sheet, and then reload the cassette. If this does not solve the problem, replace with a new ink cassette. If the ink cassette is stuck in the printer, contact a Canon Customer Support help desk for assistance. 61