Canon REALiS WUX4000 D Pro AV Multimedia Projector WUX4000 User's Manual - Page 139
TCP/IP Setting, Initializing Network Settings, Con the projector TCP/IP settings.
View all Canon REALiS WUX4000 D Pro AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
Network Settings on the Projector TCP/IP Setting [TCP/IP setting] Configure the projector TCP/IP settings. Network Setting TCP/IP setting Initializing Network Settings [Network setting initialization] You can initialize the projector network settings. Network Setting Network setting initialization Installation and Maintenance Connecting to a Network When [TCP/IP setting] is selected, the window shown below appears. Use the [ ] / [ ] buttons to select the IP address, then press the OK button. Next, use the [ ] and [ ] buttons to select the digit and the [ ] / [ ] buttons to change the value. Press the OK button, then set the subnet mask and gateway address in the same way. Finally, select [Enter]. When [Network setting initialization] is selected, the window shown below appears. Select [YES] then press the OK button. • The factory defaults are shown below. IP address 192.168.254.254 Subnet mask 255.255.255.0 Gateway address 0.0.0.0 • Setting cannot be made when [DHCP] is [On]. • If an invalid value is entered, the message "Invalid entry" appears. If this occurs, enter a valid value. • The following items are initialized. Network Password setting Register Network Password PJLink DHCP IP address Subnet mask Gateway address E-mail sender address E-mail recipient address Projector name Location 139