Canon REALiS WUX4000 D Pro AV Multimedia Projector WUX4000 User's Manual - Page 58

Adjusting the Image Adjusting the Image Position To adjust the screen position up, down, left, or right, press the LENS-SHIFT button on the remote control or the LENS button on the projector. This function is referred to as "lens shift" because the position of the projected image is changed by moving the lens position. • The available range for lens shift (percentage of movement relative to the screen size) varies depending on the lens unit which is used. Standard Zoom Lens (RS-IL01ST): Down 15% - Up 55%, Left 10% - Right 10% Long Zoom Lens (RS-IL02LZ): Down 15% - Up 55%, Left 10% - Right 10% Short Fixed Lens (RS-IL03WF): Down 5% - Up 5%, Left 2% - Right 2% • There are areas where each lens is unable to move. With the Standard Zoom Lens and the Long Zoom Lens, the areas are at the top left and top edges. With the Short Fixed Lens, the areas are at the four corners. 1 Press either the LENS-SHIFT button on the remote control or the LENS button on the projector 3 times in order to display the window shown on the lower right. Remote control Projector Push three times 2 Press the pointer buttons to adjust. Remote control Projector 3 When the desired position is reached, press the OK button. 58