Canon REALiS WUX500 D Pro AV MULTIMEDIA PROJECTOR WUX500 Users Manual
Canon REALiS WUX500 D Pro AV Manual
View all Canon REALiS WUX500 D Pro AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon REALiS WUX500 D Pro AV manual content summary:
- Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 1
PROJECTOR User's Manual Other Information Advanced Guide Basic Guide Safety Instructions Before Use Installation Procedure Connection Procedure Projection Procedure Convenient Features Using Menus Menu Description Advanced Projection Maintenance Product Specifications Troubleshooting ENG - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 2
to a network are given in the "Advanced Guide" section. Read this manual thoroughly to make the most of your projector. Installation of the projector should be performed by a qualified technician, if possible. Contact the Canon Customer Support - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 3
Table of Contents How to Use This Manual 2 Safety Instructions 5 Safety Precautions 6 CAUTION ON HANGING FROM THE CEILING Input Terminal 31 Remote Control 32 Preparing the Remote Control 34 Basic Guide 37 Installation Procedure 38 Setting Up the Projector 38 Relationship between Projecting - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 4
Replacement Lamp 163 Lamp Replacement Procedure ......... 164 Product Specifications 167 Relationship between Aspect and Screen Aspect 167 Displayed Test Patterns 171 Supported Signal Types 172 Troubleshooting 180 LED Indicator Details 180 Symptoms and Solutions 181 Index 187 Option 189 4 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 5
again, check operations and cable connections, and try the solutions in the "Troubleshooting" section in the back of this manual. If the problem still persists, contact the Canon Customer Support Center. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 6
Safety Instructions Safety Precautions WARNING: • THIS APPARATUS MUST BE GROUNDED. • (1.6') 50 cm (1.6') • Do not cover the ventilation slots on the projector. Heat build-up can reduce the service life of your projector, and can also be dangerous. • If the projector is unused for an extended time - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 7
■ READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE. All the safety and operating instructions should be read before beginning to operate the product. Read all of the instructions given here and retain them for later use. Unplug this projector from the AC power supply before cleaning. Do not - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 8
service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the projector. c. If the projector has been exposed to rain or water. d. If the projector does not operate normally after following the operating instructions - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 9
Safety Instructions Safety Instructions AC Power Cord Requirement The AC Power Cord supplied with this projector meets contact your local city office, waste authority, approved scheme or your household waste disposal service or visit www.canon-europe.com/weee, or www.canon-europe.com/battery. 9 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 10
limits in Subpart B of Part 15 of FCC Rules. Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A. Inc. One Canon Park, Melville - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 11
Safety Instructions Safety Instructions Safety Symbols in this Manual This section describes the safety symbols used in this manual. Important projector safety information is identified by the following symbols. Always observe the safety information by these symbols. Denotes the risk of death or - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 12
Safety Instructions Precautions for Use As this section contains important safety-related situations occur, turn the power off, remove the power plug from the power outlet and contact the Canon Customer Support Center. Failure to do so could cause a fire or result in an electric shock. • If smoke is - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 13
Safety Instructions Safety Instructions Pay attention to the following points regarding the power source, power plug and handling of the connector. Failure to do so may cause a fire, electric - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 14
Instructions Pay , maintenance or repair is required, contact the Canon Customer Support Center. • Do not disassemble or modify the projector (including stable. • For ceiling mounting precautions, refer to the installation manual included with the ceiling mount (sold separately). Precautions on the - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 15
Safety Instructions Safety Instructions Note the following precautions during lamp replacement or when . In this case, never attempt to replace the lamp by yourself. Always request service from the Canon Customer Support Center. • With ceiling-mounted projectors, the lamp may fall out when you open - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 16
Safety Instructions Pay attention to the following points regarding installation and handling of the projector. • If the projector will not be used for a long period of time, - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 17
in upward or downward projection. Failure to adjust the settings may shorten the lamp life or damage the lamp. For details, contact the Canon Customer Support Center. • Do not install the projector near high-voltage electrical power lines or an electrical power source. • Do not use the projector on - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 18
the adjustable feet before moving the projector. Leaving the feet extended may cause damage. Precautions for Installation Be sure to read "Safety Instructions" and "For Safe Use" (P5 - P17). Also take the following precautions during installation. • Do not strike the projector or Air intake vent - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 19
above 2,300 m (7,545.8'), Adjust the Settings Projector settings must be adjusted when using the projector at altitudes of 2,300 m (7,545.8') or higher. Specifically, refer to instructions for [Fan mode] (P86) in the [Install settings] menu. 19 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 20
Before Installation ■ When Using Mounted on the Ceiling When the projector is used mounted on the ceiling or installed in a high location, it is necessary to periodically clean the air intake and exhaust vents, and the area around the air filter. Dust that accumulates in intake or exhaust vents may - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 21
also be adjusted. Specifically, for upward or downward projection, refer to instructions for [Vertical projection] (P86) in the [Install settings] menu Always request installation by a qualified technician or the Canon Customer Support Center. 10° 10° Upward projection: Inclination of the projector - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 22
Before Installation Copyright Notice Please note that enlarging or reducing the size of an image for commercial purposes or public presentation may infringe on the legally protected copyright or the copyright holder of the original material. About Trademarks • Ethernet is a registered trademark of - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 23
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NO SUPPORT Canon Inc., and all its subsidiaries or its dealers do not make any support service regarding the source code. Canon Inc., and all its subsidiaries or its dealers shall not respond to any - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 24
. Split-Screen Display Splits the screen for projection of two separate input signals at once. (P150) HDBaseT Input The projector supports HDBaseT, a next-generation connectivity standard. HDBaseT offers a convenient connection for carrying high-quality video and audio signals equivalent to HDMI - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 25
computers via a network connection. For details on Networked Multi-Projection (NMPJ), refer to the NMPJ user's manual. -"/ Wi-Fi Connectivity In addition to wired LAN connectivity, the projector also supports Wi-Fi. In Projector Access Point (PJ AP) mode, the projector can be connected to up to - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 26
remote controls are also available (RS-RC05). However, some buttons are not supported with this projector. The RS-RC05 can also be used as a wired For Continental Europe • Important Information For the U.S.A. and Canada • User's Manual (CD-ROM) • Warranty Card ■ Attaching the Lens Cap Align the - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 27
Part Names Projector ■ Front Side Before Use Before Use Side control (P28) Projection lens (P28) Power cord connector (P46) Terminals and connectors (P31) Infrared remote receiver (P35) Air intake vent Air filter (P160) Adjustable feet (P38) • Do not block the air intake. Doing so may cause - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 28
Before Use Projection Lens (1) (2) (1) Optical zoom adjustment Move the lever to resize the image. (P53) (2) Focus adjustment Turn the focus ring to adjust image focus. (P53) Side Control (6) (7) (5) (4) (3) (2) (1) (1) POWER button (P47, P62) Turns the projector on or off. (2) INPUT button (P50) - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 29
under normal conditions when the power is on. • WARNING (red) : Lights up or flashes when an error occurs. • LAMP (orange) : Lights up or flashes when a problem occurs with the lamp or lamp cover. • TEMP (red) : Lights up or flashes when the internal temperature is high. 29 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 30
Before Use ■ LED Indicator Displays The LED indicators flash or illuminate to indicate the operating status of the projector. Legend: Example of when the POWER ON indicator is on; : Off : Lit : Flashing LED indicator POWER ON (green) WARNING (red) LAMP (orange) TEMP (red) Operating status A - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 31
) Receives HDBaseT input including digital video and audio signals. A single HDBaseT cable (shielded twisted pair) can be used for both video and audio input. (10) Service port (CONTROL) It is not used during ordinary use. 31 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 32
Before Use Remote Control The projector can be operated using buttons on the remote control or the side control on the projector. The remote control allows you to operate all functions of the projector. (4) KEYSTONE button (P58) (8) Corrects keystone distortion. The [Keystone] setting enables - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 33
Before Use Before Use (14) EXIT button (P68) Cancels functions such as menu display or test pattern during operation and returns to the image display. (15) VOL button Adjusts the sound volume. (10) [+] button: Increases the volume. [-] button: Decreases the volume. (11) (16) TEST PATTERN - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 34
Before Use Preparing the Remote Control ■ Installing Remote Control Batteries 1 Open the battery compartment lid. Slide the lid while pressing it down. 2 Insert batteries. Insert 2 new AAA batteries in the compartment with the + and - terminals positioned correctly. 3 Close the compartment lid. - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 35
Before Use Before Use ■ Remote Control Operating Range The remote control is an infrared type. Point it at the infrared remote receiver on the front or rear of the projector to operate it. 25° 25° 8 m (26.3') 8 m (26.3') 25° 25° • Use the remote control within an angle of 25° in any direction - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 36
36 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 37
Basic Guide Other Information Advanced Guide Basic Guide Safety Instructions Before Use Installation Procedure Connection Procedure Projection Procedure Convenient Features Using Menus Menu Description Advanced Projection Maintenance Product Specifications Troubleshooting 37 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 38
Installation Procedure Before setting up the projector, be sure to read "Before Installation" (P18). Setting Up the Projector ■ Positioning the Projector in Front of the Screen Place the projector in front of the screen. • To avoid keystone distortion, install the projector so that it is at right - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 39
Basic Guide Installation Procedure Installation Procedure ■ Installation on High Surfaces For projection from a shelf or other high surface, the projector can be installed upside-down and the - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 40
Option" (P189). For details, refer to the assembly and installation manual provided with the ceiling attachment. Mounting the Projector on the Ceiling You CL08 or RS-CL09) may also be required. Contact the Canon Customer Support Center for more detailed information. • Make sure to use the optional - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 41
Basic Guide Installation Procedure Installation Procedure Relationship between Projecting Distance dials on the side of the projector, which moves the lens up, down, left, or right. For instructions, refer to "Adjusting the Image Position" (P53). ■ Amount of Lens Shift The amount of lens shift - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 42
described below. Using lens shift outside of this range may cause problems such as peripheral dimness or lower resolution. In this case, adjust horizontal lens shift distance from the central image position within the range supported for lens shift. • Watch projected images as you perform lens shift - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 43
Basic Guide Connection Procedure Connection Procedure Before connecting the projector to other equipment, turn off both the projector and the other equipment. Connecting a Computer Amplified speakers Mini - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 44
Connection Procedure Connecting a Computer (continued) Computer AUDIO output terminal Monitor output terminal (Mini D-sub 15-pin) Audio cable (not included) Computer cable (not included) or BNC cable (not included) Mini D-sub 15-pin - BNC terminal converter cable (not included) HDBaseT terminal - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 45
Basic Guide Connection Procedure Connecting AV Equipment Connection Procedure Amplified speakers RCA Mini jack terminal AV equipment RCA Mini jack terminal D terminal RCA component terminal Audio cable ( - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 46
Connection Procedure Notes on HDBaseT • Use a shielded cable rated at CAT5e or better. • Maximum transmission distance is 100 m. • However, maximum transmission distance may be shorter in some environments. • Do not use the LAN cable when it is coiled or bundled. • Inserting or removing the LAN - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 47
Basic Guide Projection Procedure Projection Procedure Step 1 Turn the Projector On 1 Check the connection between the projector and the computer or AV equipment. (P43 - P45) For instructions on connecting the power cord, refer to "Plugging the Projector In" (P46). 2 Press the POWER button. The [ - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 48
Projection Procedure ■ When the Language Selection Screen Appears A screen appears when the projector is turned on for the first time. You can select a language to be used by the projector for displaying menus and messages in the window. Select the desired language with the pointer buttons and - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 49
Basic Guide Projection Procedure Projection Procedure Changing Notebook Computer Screen method used to turn on the external monitor output vary depending on the model. For details, see the manual for your notebook computer. • With Windows 8.1, Windows 8 or Windows 7, you can turn on image output - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 50
connected to the projector over a network can be projected when you have selected [LAN] as the input signal. For details, refer to the NMPJ user's manual. • Images on USB flash drives can be projected when you have selected [USB] as the input signal. For details, refer to "Projecting Images on a USB - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 51
Basic Guide Projection Procedure Step 3 Adjust the Image Projection Procedure Setting the Display Resolution of the Computer Based on the maximum resolution of the projector, set the - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 52
the above operation, adjust [Total dots], [Tracking], [Horizontal position], [Vertical position], [Horizontal pixels] and [Vertical pixels] in [Input signal settings]. (P71) • For the signal types supported by the projector, see the table on page 172 to 173. 52 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 53
too small to adjust it with the zoom function. Basic Guide Projection Procedure ■ Adjusting the Image Position Turn the lens the upper lens shift dial or the lower part of the lower lens shift dial. Manual adjustment using the lens shift 2 dials moves the image as follows. 4 For details on - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 54
Projection Procedure Step 4 Select an Aspect Ratio (Screen Aspect) Matching the Screen Select an optimum aspect ratio of the projected image (screen aspect) or an optimum screen mode (aspect) according to the aspect ratio of the screen, type of input image signal and so on for the projection to - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 55
Basic Guide Projection Procedure Projection Procedure 3 Select [Screen aspect] with the [ ] / [ ] buttons, and then press the OK button. Remote control Projector 4 Use the [ ] / [ ] buttons to select the - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 56
Projection Procedure 16:9 D. image shift Select this when you use a screen with an aspect ratio of 16:9. Keystone correction cannot be performed in this mode. However, it is possible to move the image up / down when projecting level. For details about how to move the image, refer to "Screen aspect" - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 57
Basic Guide Projection Procedure Projection Procedure Selecting an Aspect Ratio Press the ASPECT button on the remote control and select an appropriate aspect ratio. Press the ASPECT - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 58
to adjust image width or height distortion separately, and use corner correction to adjust the position of each corner of the image. For instructions on switching keystone correction, refer to "Keystone" (P85). • Keystone correction may not be effective in some lens shift positions. • If keystone - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 59
Basic Guide Projection Procedure Projection Procedure 2 Press the pointer buttons to adjust the dimensions. Remote control Projector To correct top distortion, press the [ ] button. To correct bottom - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 60
Projection Procedure 2 Press the pointer button of the corner for correction, and then press the OK button. Remote control Projector 3 Press the pointer buttons to adjust the corner. Remote control Projector 4 When you have finished correcting, press the OK button. ■ Resetting the Keystone - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 61
Basic Guide Projection Procedure Projection Procedure Step 6 Select the Image Quality (Image Mode) You can select an image mode to suit the projected image. In each image - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 62
Projection Procedure ■ Selecting an Image Mode Press the IMAGE button on the remote control to select. The image mode changes each time the IMAGE button is pressed. (The displayed image modes vary depending on the selected input signal.) Remote control You can also select any image mode from the [ - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 63
Basic Guide Convenient Features Convenient Features This section describes features convenient project images stored on a USB flash drive simply by connecting it to the USB port. For instructions on projection from a USB flash drive in the projector's USB port, see "Projecting Images on a USB Flash - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 64
Convenient Features Projecting a Test Pattern from the Menu Even without any input signals, the projector can project a test pattern. Test patterns can be projected during installation to check how the projector is installed. For details on projecting test patterns, see "Install settings" (P83) or " - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 65
Advanced Guide Other Information Advanced Guide Basic Guide Safety Instructions Before Use Installation Procedure Connection Procedure Projection Procedure Convenient Features Using Menus Menu Description Advanced Projection Maintenance Product Specifications Troubleshooting 65 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 66
Using Menus Use the menus to set the operation of the projector in detail. Menu Configuration The menu screen is divided into 6 tabs as shown below. [Input settings] tab (P69) You can set the type of signal or the method of projection of the images input. [Image adjustment] tab (P76) You can adjust - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 67
button to display the menu window. Remote control Projector Using Menus 2 Press the [ ] / [ ] buttons to select a tab. Remote control Projector Advanced Guide Using Menus • If the tab position is not highlighted in orange, press the [ ] / [ ] buttons to move the current selection to the top - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 68
screen (1) Example: Menu position (P90) 1. Select [Menu position]. 2. Press the OK button to display a different screen. 3. Then follow the instruction on the screen. Selecting from a different screen (2) Example: Tracking (P71) 1. Select [Input signal settings]. 2. Press the OK button to display - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 69
ratio, resolution, and projection from a USB flash drive. Advanced Guide Menu Description (When the input signal is Analog PC-1) Menu Function adjusts display position misalignment and screen flickering. Input signal select Manually set a resolution to suit computer images. Input signal - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 70
insufficient, adjust [Total dots], [Tracking], [Horizontal/Vertical position] and [Horizontal/Vertical pixels] in [Input signal settings]. (P71) • For supported signals, see the table on page 172 - 173. Input signal select > [Input settings] > [Input signal select] Select a suitable resolution - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 71
Input signal settings > [Input settings] > [Input signal settings] Complete input signal settings. Menu Description Advanced Guide Menu Description Submenu Total dots Tracking Horizontal position Vertical position Horizontal pixels Vertical pixels Function Adjust the total number of horizontal - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 72
> [Input settings] > [PC-free multi projection] Specify settings when projecting images on a USB flash drive to multiple networked projectors. For instructions, see "Using PC-Free Multi Projection" (P147). Mode setting Specify the mode for PC-free multi projection: Master*1 or Slave*2 mode - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 73
Advanced Guide Menu Description Menu Description Slideshow interval Specify the interval after which slideshow images are switched. Enter the time in a range of 5 seconds to 10 minutes, - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 74
level is selected automatically. (Some AV equipment and HDBaseT transmitters may not support this.) • If your AV equipment HDMI output can be set to [ or [Expanded]. For more detailed information, refer to the user's manual for the AV equipment connected to the projector. Color space > [Input - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 75
Advanced Guide Menu Description Menu Description Progressive > [Input settings] > [Progressive] Performs progressive processing optimized for still images in cinematic content or moving images in videos. Submenu Off - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 76
Menu Description Image adjustment This section describes image quality settings such as brightness, contrast, and sharpness. (When the input signal is Analog PC-1) Menu Function Details Image mode * Select overall image quality to suit the projected image. P77 Create profile Save desired - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 77
Advanced Guide Menu Description Menu Description Image mode > [Image adjustment] > [Image mode] Select the overall image quality for projected images. Can also be selected by pressing the - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 78
Menu Description Brightness > [Image adjustment] > [Brightness] Adjust image brightness. Contrast > [Image adjustment] > [Contrast] Sharpen or soften image contrast. Sharpness > [Image adjustment] > [Sharpness] Adjust image sharpness. Gamma > [Image adjustment] > [Gamma] Correct image areas that are - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 79
Advanced adjustment > [Image adjustment] > [Advanced adjustment] Fine-tune noise reduction and color tone. Menu Description Advanced Guide Menu Description Ambient light Minimize the effect of ambient light on the screen. Option Function Off Projects an image with no correction. Adjust - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 80
Menu Description MPEG noise reduction Reduce MPEG image noise. Option Function Off Disables MPEG noise reduction. Weak Middle Strong Specify one of three levels of intensity of the MPEG noise reduction. Mosquito noise reduction Reduce mosquito noise*. * A type of noise affecting image - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 81
. Adjustments to white are also applied to the three other colors. Note that adjusting any color will overwrite previous adjustments. Advanced Guide Menu Description • For details on gamma correction, see page 78. • Use input signals or a built-in test pattern for adjustment. • Adjustment - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 82
Menu Description Lamp mode > [Image adjustment] > [Lamp mode] Reducing the lamp brightness reduces power consumption and cooling fan noise. It can also be displayed by pressing the ECO button on the remote control. Submenu Full power Power saver Function Projects images at full brightness. - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 83
precautions. Project a test pattern to check the resolution and color of projection during installation. Details P84 P84 P84 P85 P85 P85 P89 P89 P91 Advanced Guide Menu Description 83 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 84
image is inverted in the vertical direction. • To hang the projector from the ceiling, use the optional bracket. Contact the Canon Customer Support Center for more detailed information. • Image flipping will reset any adjustment for keystone distortion. In this case, redo the adjustment. Screen - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 85
[ ] / [ ] buttons. This cannot be selected when the screen aspect is 16:9, 16:10 or 4:3. Professional settings > [Install settings] > [Professional settings] Specify advanced installation settings. Advanced Guide Menu Description 85 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 86
Menu Description Micro-digital image shift Use this setting to fine-tune the position of the projected image. Option Function Off Does not perform micro digital image shift. Adjust Use the [ ] / [ ] buttons for vertical shift and the [ ] / [ ] buttons for horizontal shift. Adjust Chart - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 87
, can be adjusted for a more seamless appearance. For detailed instructions, see "Projecting from Multiple Projectors at Once (Edge Blending)" menu for blending area adjustment. End marker Start marker Advanced Guide Menu Description Blending area Adjustment may not eliminate different colors - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 88
Menu Description Option Black level adjustment Marker Reset Function Because black is lighter in the blending area than in other areas, you can adjust the black level outside the blending area to make this difference in brightness less noticeable. Left image Position of end marker (hidden) $#" - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 89
-tune red, green and blue. On screen > [Install settings] > [On screen] Specify display details for on-screen menus, help, and warning or precaution icons. Advanced Guide Menu Description 89 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 90
position Reposition menu display. Use the buttons to move the menu to the desired position. Guide Shows the guide screen. Option Function Off Hides the guide screen. On Shows the guide screen. The guide screen is shown at the following cases. • No input signal is detected. • An invalid - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 91
Advanced Guide Menu Description Menu Description Lamp warning display Specify whether to show a lamp replacement message after the lamp has been used for a specified period. Option Function - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 92
Menu Description System settings Customize projector and remote control operation, beeping, and other details after startup, during standby, and in other situations. (When the input signal is Analog PC-1) Menu User screen settings Interface settings Power management mode Power management duration - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 93
User screen settings > [System settings] > [User screen settings] Capture a logo and specify logo display settings. Menu Description Advanced Guide Menu Description Logo capture Registers the current image as a user logo. Registered user logos can be shown when no signal is received, when the - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 94
Menu Description Interface settings > [System settings] > [Interface settings] Specify interface details such as settings for input signals of connected equipment. Key repeat Key repeat enables projector or remote control buttons to be held down instead of pressing them repeatedly. Option - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 95
output. HDBaseT Use HDBaseT audio signals for audio output. LAN Use LAN audio signals for audio output. Audio is transferred by the NMPJ application. Advanced Guide Menu Description 95 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 96
serial communication. Otherwise, you can refer to this setting to check setting values for the selected port. Option Function Service port Use the RS-232C port (service port). HDBaseT Use the HDBaseT serial port. Display setting values for the selected serial communication. Detail Stop bit - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 97
, restoring projection requires the same steps as when turning the projector on normally. • When [Disabled] is selected, [Direct power on] (P98) is not available. Advanced Guide Menu Description 97 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 98
Menu Description Power management duration > [System settings] > [Power management duration] Specify how long before the lamp is turned off or the projector enters standby, depending on the [Power management mode] setting. Submenu 5 min. - 60 min. Function After 30 seconds without an input - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 99
. Language English Russian German Dutch French Finnish Italian Norwegian Spanish Turkish Portuguese Polish Swedish Hungarian Czech Danish Arabic Chinese (Simplified) Chinese (Traditional) Korean Japanese Advanced Guide Menu Description 99 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 100
Menu Description Other settings > [System settings] > [Other settings] Lock operation with a password, set a password, reset counters for lamp or air filter replacement, and access other settings and information. Password settings Disables the projector unless the correct password is entered. - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 101
Advanced Guide Menu Description Menu Description Register password You can register a password for starting projection. Enter a 4 digit password. Enter the password using the buttons. The 4-digit password - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 102
illustration only and differ from actual versions. • In some cases, it may not be possible to download updates. For details, contact the Canon Customer Support Center. Firmware updating takes a few minutes. During the update, the LED indicator will flash in red. Do not turn off the projector while - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 103
lock Image flip H/V Screen aspect Keystone Professional settings Micro-digital image shift Registration Fan mode Vertical projection Screen color On screen Guide Show input status Overheat warning display Menu display time Lamp warning display Air filter warning display Split screen ID display Test - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 104
Audio in 1 Analog PC-2 Audio in 2 Component Audio in 2 HDBaseT HDBaseT LAN LAN USB Audio in 1 HDBaseT Off Serial communication Service port HDMI image input Computer HDBaseT image input Computer Submenu Power management mode Power management duration Direct power on Beep Motion blur - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 105
can be used as an access point for direct communication with wireless LAN-compatible computers. Up to five computers can be connected at once. Advanced Guide Menu Description 105 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 106
Menu Description Projector (in PJ AP mode) Wireless LAN-compatible computers The following network features are available in PJ AP mode. • Web features • NMPJ features (networked screen projection) • User commands Other network features (specifically, SNMP, PJLink, Mail, AMX, Crestron RoomView and - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 107
Advanced Guide Menu Description Menu Description • The following network features are available in same as that of other computers on the network. To set a projector IP address, follow the instructions in "Completing Computer Settings" (P120) and use the web screen, or use projector TCP/IP settings - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 108
Check the Canon website for a list of countries and regions where use of the wireless LAN function permitted. Canon assumes no responsibility whatsoever for problems, etc., that may arise from use of the wireless LAN function in countries and regions other than those listed. ■ Model Number WUX500 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 109
Advanced Guide Menu Description Menu Description Statement on EC directive Canon Inc. tímto prohlašuje, že tento ZC-ST je ve shodě se základními požadavky a další - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 110
Menu Description Completing Projector Settings Settings described in this section apply to wired and wireless network connections, setting a network password, and other aspects of networked projection. (When the input signal is Analog PC-1) Menu Function Network settings lock Lock network - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 111
is not used. A network password is used. Register network password > [Network settings] > [Register network password] Use the buttons to enter the projector network password. Advanced Guide Menu Description 111 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 112
Menu Description Network standby settings > [Network settings] > [Network standby settings] Specify the operating status of wired network functions in standby mode. Submenu Normal Low-power Function All network functions are available even in standby mode, including the web screen, control over - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 113
Detailed settings (wired) > [Network settings] > [Detailed settings (wired)] Display and manually change the wired IP address, gateway address, and other settings. Available only when wired networking is [On]. Advanced Guide Menu Description Menu IP address Gateway address MAC address DHCP - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 114
Menu Description Menu Network setting initialization Function The following connection settings are initialized. • Settings used for web login, such as the network setting screen, user name, password, and other settings • Network password setting • Network (wired/wireless) • Network standby - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 115
manually change the wireless IP address, gateway address, and other settings. Available only when wireless networking is [On]. Advanced Guide , select [OK] on the screen. Connect in PIN mode. Following the instructions shown, enter the displayed 8-digit PIN code on the wireless base station (access - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 116
(P105, P106) A list of available access point SSIDs is displayed. You can find available access points nearby and change the name of the connection. Manual settings SSID Security Channel Key ID Key type Key Apply Select the wireless security from [Open], [WEP], [WPA2 AES], or [WPA/WPA2 TKIP/AES - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 117
settings • Register network password • DHCP (wireless) • IP address (wireless) • Subnet mask (wireless) • Gateway address (wireless) • E-mail sender address • E-mail recipient address • Projector name • Comments Advanced Guide Menu Description 117 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 118
to Class 1 as defined in PJLink standards established by the Japan Business Machine and Information System Industries Association (JBMIA). This projector supports all commands that are defined by PJLink Class 1, and has been verified as conforming to the PJLink standard Class 1 definition. • For - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 119
management of multiple projectors over a network. Networked projectors can be remotely controlled to troubleshoot issues, check the useful life of lamps, or turn the projectors on or off website. http://www.crestron.com/ • Only available for wired connections. Advanced Guide Menu Description 119 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 120
Menu Description Completing Computer Settings Specifying an IP Address Instructions for setting a computer's wired or wireless IP address are as follows for each operating system. ■ Windows 8 / 8.1 1 Right-click on the start screen background and click [ - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 121
Advanced Guide Menu Description Menu Description ■ Windows 7 1 From the PC [Start] menu, select [Control Panel]. 2 Click on [Network and Internet], then click on [View network status and - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 122
Menu Description ■ Mac OS X 1 Open the Apple Menu and select [System Preferences]. 2 In the System Preferences window, click [Network] to display the Network window. 3 For a wired connection, select [Built-in Ethernet], or for a wireless connection, select [Wi-Fi]. Next, click the [TCP/IP] tab. Make - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 123
For details on downloading the Networked Multi-Projection (NMPJ) application, refer to the NMPJ user's manual. The projector's own default IP address is 192.168.254.254 for wired connections and 192. Settings] on the web screen. The password input window appears. Advanced Guide Menu Description 123 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 124
Menu Description 4 Enter the user name and password on the password input window, then click [OK]. The factory default user name is "root" and the password is "system". The settings screen is displayed. Complete the network settings on this screen. To control the projector from the computer, click [ - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 125
Advanced Guide Menu Description Menu Description 2 Enter setting details in the fields shown (1), and then click [OK] (2). (1) (2) 3 A confirmation window appears. Check the contents and if they are - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 126
Menu Description Setting a Password [Password] From [Password] in the settings screen, you can set a user name and password for web screen login. For the setting procedure, refer to "Network Setting" (P124). Item User name New password Confirm new password Explanation When logging into the web - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 127
reconnect to the network. If the network subnet mask was changed, select [Subnet mask] in the above screen and set the new subnet mask. Advanced Guide Menu Description 127 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 128
the wireless default gateway IP address in 1-byte numbers. 0.0.0.0 Select a simple method of establishing None (configure a wireless connection. manually) Select the wireless connection mode. infrastructure mode Select the wireless access point's SSID. Click the [Refresh] button to update the - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 129
authentication. For the setting procedure, refer to "Network Setting" (P124). Advanced Guide Menu Description Item Password Confirm password Explanation Factory default setting Enter the password required ]. For details on Networked Multi-Projection (NMPJ), refer to the NMPJ user's manual. 129 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 130
Menu Description Setting Up Email [Mail] From [Mail] in the settings screen, you can set the items necessary to send error mails and test mails. For the setting procedure, refer to "Network Setting" (P124). Item To: Cc: From: SMTP server IP address SMTP server port number SNTP server IP address - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 131
settings for authentication of mail that is sent when an error occurs. For the setting procedure, refer to "Network Setting" (P124). Advanced Guide Menu Description Item Mail authentication User name Password Confirm password POP3 server IP address POP3 server port number POP before SMTP response - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 132
Menu Description Sending a Test Mail [Send test mail] From [Send test mail] in the settings screen, you can send a test mail to the mail address that was set in [Mail]. The settings cannot be changed from this screen. Item To: Cc: From: Subject: Explanation The recipient address which was set from - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 133
projectors when multiple projectors are installed on the network. For the setting procedure, refer to "Network Setting" (P124). Advanced Guide Menu Description Item Projector name Comment Explanation Enter the projector name in 1-byte alphanumeric characters and symbols (1 - 63 characters - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 134
Menu Description Setting PJLink [PJLink] From [PJLink] in the settings screen, you can set the PJLink functions which are the standard for projector management on a network. For the setting procedure, refer to "Network Setting" (P124). For information about PJLink, refer to "What is PJLink?" (P118). - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 135
server. System failed to connect POP3 server. System doesn't support this auth type. System failed to authenticate. The system failed to send a test mail. An authentication type was set which is not supported by the server. Authentication failed attempting to send a test mail. Sending of - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 136
Menu Description Resetting Network Settings to the Default Settings 1 Perform steps 1 - 3 on "Displaying the Network Configuration Screen" (P122) to display the settings screen. 2 Click [Initialize]. 3 A confirmation window appears. Click [OK]. 136 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 137
some reason or the outside air temperature is higher than the specified one. If the problem is inside the projector, check whether the projector is installed and operated normally, turn off supply is abnormally high or any other problem has occurred in the power supply. Contact your dealer. Advanced - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 138
Menu Description Controlling the Projector from a Computer The projector can be controlled from a computer over a wired or wireless network connection. 1 Turn on the computer and projector. 2 Launch a web browser, enter "http://(projector IP address)" in the address bar, and press the Enter key. The - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 139
information are displayed at the top of the screen. 5 When the operations are finished, click [Back to top] to return the initial web screen. Advanced Guide Menu Description 139 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 140
Menu Description Checking Projector Information You can check information about the signal types of the images projected and other information. Menu Function Model name Shows the model name. Input signal Details of the input signal currently selected Information such as the type, resolution, - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 141
(Pj AP) Off/On (Pj AP) Off/On (Infra) IP address (wired) × × × IP address (wireless) × × E-mail sender address × E-mail recipient address × Projector name × Comments × Advanced Guide Menu Description 141 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 142
Advanced Projection Projecting Images on a USB Flash Drive JPEG images stored on a USB flash drive connected to the projector can be projected as follows. Individual images can be selected for projection, or you can project all images in a slideshow. JPEG images up to 10912×8640 can be projected. • - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 143
Advanced Guide Advanced Projection Advanced Projection 3 Select a file to project. Motion blur reduction is not available when projecting JPEG files on a USB flash drive. (P99) 4 Switch to - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 144
Advanced Projection Description of USB File Browser If a USB flash memory is connected to the projector, the USB file browser appears. In the USB file browser, you can select the image file to be projected by operating the file list in the USB memory device. Thumbnail view List view (1) (1) - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 145
Advanced Guide Advanced Projection Advanced Projection Selecting an Image for Projection This section describes the steps for selecting an image in the USB file browser and projecting - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 146
Advanced Projection Running a Slideshow of Data Saved in a USB Flash Memory Multiple images on a USB flash drive can be projected consecutively, with each shown for a specific interval. ■ Creating an Image File Folder During slideshows, files in a folder are projected in alphabetical order by file - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 147
the other eight, Slave projectors. The image as a whole is controlled by the Master projector. USB flash drive Master Slave Advanced Guide Advanced Projection Slave Slave ■ Preparing for Projection 1 Set up the projectors. On each projector, configure installation and image adjustment settings - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 148
Advanced Projection 4 Configure one projector as the Master projector. In the [Input settings] menu, configure the following settings in [PC-free multi projection]. • [Layout pattern setting] Specify the total number of projectors and the layout pattern. No. of Projectors Layout Pattern (Columns - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 149
Master projector • Layout setting 12 34 If the image does not switch to the image for the corresponding number, adjust the IP address setting. Advanced Guide Advanced Projection 149 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 150
Advanced Projection Split-Screen Display Two input images can be projected side by side. This is split-screen display. When you activate split-screen display, the current image is shown on the left side, and the new image is shown at right. You can change the source of images shown on each side by - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 151
Advanced Guide Advanced Projection Advanced Projection Projecting from Multiple Projectors at Once (Edge Blending) Overlapping edges of images from multiple projectors used together can be blended to make the overall image more seamless. ■ Basic Instructions Follow these steps when using two - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 152
toward the center of the image) is called area "D." Normally, three areas are identified in the context of end markers: A, B, and C. In the following instructions, only area D is adjusted, and the widths of A, B, and C are left at the default value of 0. To prepare for adjustment, set [No signal - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 153
brightness and colors of the blending area and area D match. Advanced Guide Advanced Projection Adjust [D-area base] to lighten the black level, and and C must be adjusted to suit these blending areas. In this example, instructions are given for adjusting area B. 1 In the [Install settings] menu, - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 154
corner in the blending area can be aligned with the blending area of the reference projector. • First, complete [Side] adjustment as described in "Basic Instructions" (P151). • Sides set to an edge-blending width of 12 or more can be adjusted when [Keystone] is set to [Corner adjustment] and the - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 155
opposite side of the overlapping area, so that the screen as a whole is corrected. 5 Set the reference projector's edge-blending markers to [Off] (P151). Advanced Guide Advanced Projection 155 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 156
156 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 157
Other Information Other Information Advanced Guide Basic Guide Safety Instructions Before Use Installation Procedure Connection Procedure Projection Procedure Convenient Features Using Menus Menu Description Advanced Projection Maintenance Product Specifications Troubleshooting 157 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 158
damage the finish of the projector. • When using a chemical dust cloth, make sure to read the instructions thoroughly. • When cleaning the projector's lens, use a commonly available air blower or lens cleaning paper. display] is set to [Off]. (P91) Reset the air filter counter manually. (P102) 158 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 159
Other Information Maintenance Maintenance Do not rinse the air filter in water. This may damage the air filter and projector. 159 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 160
will not work properly. • We recommend cleaning or replacing the air filter (part no: RS-FL02) when you replace the lamp. • Contact the Canon Customer Support Center for further information. • Replacement air filter part number: RS-FL02 • This can also be purchased from the Canon website. 160 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 161
Other Information Maintenance Maintenance Replacing the Lamp When the usage time of the lamp exceeds a certain amount of time, the following message (two types) is displayed for 10 seconds every time the projector is turned on. 2,700 hours to less than 3,000 hours Prepare a new lamp when this - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 162
Maintenance • Lamps are more likely to rupture once the lamp replacement message has been displayed. Replace the lamp with a new one as soon as possible. • Lamps should be replaced about every 3,000 hours. Note that there is no guarantee about how long lamps will last. • Useful life of lamps varies - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 163
to replace the lamp by yourself. Always request service from the Canon Customer Support Center. Additionally, with ceiling-mounted projectors, the lamp If a lamp ruptures, contact the Canon Customer Support Center and follow the instructions in "Precautions when replacing lamps that stop working - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 164
Maintenance Lamp Replacement Procedure 1 Turn off the projector power and remove the power plug. 2 Press the lamp cover release button to release the lock. 3 As you hold down the lamp cover release button, slide the lamp cover toward the back, and then lift the cover to open it. Release button As - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 165
. • We recommend cleaning or replacing the air filter (part no.: RS-FL02) when you replace the lamp. • To order air filters, contact the Canon Customer Support Center. Other Information Maintenance 165 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 166
Maintenance ■ If the Lamp Cover Comes Off Align the point of attachment on the lamp cover with the groove on the projector and gently push the lamp cover to attach it. 166 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 167
Product Specifications Relationship between Aspect and Screen Aspect This section describes the relationship between screen aspect (P54) and aspect (P56). Select an optimum aspect ratio of the projected image (screen aspect) or an optimum screen mode (aspect) according to the aspect ratio of the - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 168
Product Specifications ■ When projecting at the original aspect ratio on a 16:9 screen Original Aspect Ratio (16:10) 1920 x 1200 1440 x 900 1280 x 800 Screen aspect setting (P54) Aspect setting (P56) [Auto] Screen image (16:9) 1920 x 1080 1280 x 720 [16:9] [16:9 D. image shift] [16:9] [Auto - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 169
Product Specifications ■ When projecting to fill a 16:10 screen Original Aspect Ratio (16:10) 1920 x 1200 1440 x 900 1280 x 800 (16:9) 1920 x 1080 1280 x 720 (4:3) 1600 x 1200 1400 x 1050 640 x 480 Screen aspect setting (P54) Aspect setting (P56) [16:10] [Auto] [16:10] [16:10] [16:10] - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 170
Product Specifications ■ When projecting to fill a 4:3 screen Original Aspect Ratio (16:10) 1920 x 1200 1440 x 900 1280 x 800 Screen aspect setting (P54) Aspect setting (P56) [4:3] (16:9) [4:3] 1920 x 1080 [4:3 [4:3] 1280 x 720 D. image shift] (4:3) 1600 x 1200 1400 x 1050 640 x 480 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 171
to switch pattern. A dialog box is shown during test pattern display that identifies the current test pattern and provides operating instructions. The following test patterns can be displayed. Use [ ] / [ ] to switch patterns Use [ ] / [ ] to switch option patterns (1) Color bars (2) Stairstep - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 172
Signal Types This projector supports the following signal types. If your computer or AV equipment is compatible with any one of these signal types, the projector's Auto PC function selects - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 173
1080PsF 28.125 33.750 25.000 30.000 * The specifications in the table above are subject to change without notice. * This projector does not support any computer output signal with a dot clock of higher than 162 MHz. * Use a computer cable in which all pins are connected. If the cable is - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 174
1200) x 3 panels / 6,912,000 Zoom ratio / Focal length / F value 1.8x / 21.7 - 39.0 mm / f2.8 Zooming / Focus adjustment Manual / Manual Lens shift V: 0% to +60% (manual) H: ±10% (manual) Light source, power consumption 250-NSHA 260 W / 200 W (Lamp mode Full power / Power saver) Image size - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 175
.6 (D) in (including the projection) Mass 5.9 kg / 13.0 lbs Accessories Remote control, remote control dry-cell batteries, power cord, lens cap, PC cable, Important Information, User's Manual (CD-ROM) and Warranty Card Other Information Product Specifications 175 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 176
Product Specifications Model name Standards IEEE802.11b/g/n WUX500 Wireless connectivity Supported channels 1 CH - 11 CH Frequency band 2.4 GHz *1 In full power lamp mode *2 Compliance with ISO21118-2012 * 99.99% or more of the LCD panel pixels - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 177
Pin No. Signal 9 +5 V power 10 Ground (Vertical sync.) 11 Ground 12 DDC data 13 Horizontal sync. 14 Vertical sync. 15 DDC clock ■ Service Port (CONTROL) Pin assignment Pin No. Signal 1 OPEN 2 RxD 3 TxD 4 OPEN 5 GND 6 OPEN 7 Internal pull-up 8 OPEN 9 OPEN Communication format - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 178
Product Specifications User commands Commands Power on Power supply Power off Power status acquisition HDMI Digital PC Analog PC-1 Analog PC-2 Input source Component LAN USB HDBaseT Input source acquisition Standard Presentation Photo/sRGB Dynamic Video Image Mode User 1 User 2 User 3 User - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 179
Product Specifications Commands ASCII representation Sharpness Sharpness value setting SHARP= Sharpness acquisition GET=SHARP Contrast Contrast value setting CONT= Contrast acquisition GET=CONT Auto ASPECT=AUTO 4:3 ASPECT=4:3 Aspect 16:9 16:10 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 180
Troubleshooting LED Indicator Details When there is a problem with the projector, the LED indicator the same warning occurs again, there may be a malfunction in the projector. Contact the Canon Customer Support Center. WARNING and Faulty lamp LAMP are lit. The lamp does not illuminate. If the lamp - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 181
Troubleshooting LED indicator status WARNING (only) flashes 3 times repeatedly. Meaning Filter error Cause and countermeasure The air filter is not installed. Check whether or not the air filter is installed correctly. Contact the Canon Customer Support Center if the same warning occurs again. - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 182
Troubleshooting BLANK function has been selected. No image is projected due to a problem with the computer. The external monitor output is not set on the model of notebook computer. For more detailed information, refer to the manual that came with your computer. Check whether the dual screen ( - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 183
Troubleshooting Cause Images on a USB flash drive cannot be projected. The LAN cable (shielded twisted pair) is not connected correctly. A P33) Use an audio cable without a built-in resistor. Change the Audio In terminal to the appropriate setting. (P95) Other Information Troubleshooting 183 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 184
Troubleshooting ■ The Projected Image Is Blurred Cause The image is out of focus. The distance to the screen is too short. The projector is not placed - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 185
clean or replace the air filter. (P158, P160) If the lamp has ruptured, follow the instructions in "Precautions when replacing lamps that stop working" (P15). Check whether the operating temperature is ] under [Professional settings] to [High altitude]. (P86) Other Information Troubleshooting 185 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 186
Troubleshooting ■ You Cannot Operate the Remote Control Cause Batteries are not installed properly or they have run out. You are operating the remote control from the - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 187
Index Numerics 6-axis color adjust 81 A Adjusting keystone distortion 58 Air filter 160 Ambient light 79 AMX Device Discovery 119 Analog PC 50 ANALOG PC-1 / DVI-I input terminal 31 ANALOG PC-2 / COMPONENT input terminal 31 ASPECT 57 Aspect 56, 167 AUDIO IN terminal 31 AUDIO OUT terminal - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 188
Index M Memory color correction 80 Menu 66 N Network password 111 Network settings 66 Networked Multi-Projection (NMPJ) 25, 129 Noise reduction 79, 80 O OK 33 Optical zoom 53 P Password 100, 101 PC-free multi projection 72 PJLink 118, 134 POWER 47, 62 Power-Saving Settings 64 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 189
• Option feet Part No.: RS-FT01 * Use the above materials to hang the projector from the ceiling. For details, refer to the assembly and installation manual provided with the ceiling attachment. 189 - Canon REALiS WUX500 D Pro AV | MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 190
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan U.S.A. CANON U.S.A. INC. One Canon Park, Melville, New York 11747, U.S.A. For all inquires concerning this product, call toll free in the U.S. 1-800-OK-CANON CANADA CANON CANADA INC. HEADQUARTERS 6390 Dixie Road, Mississauga,
Safety Instructions
Before Use
Basic Guide
Installation Procedure
Connection Procedure
Projection Procedure
Convenient Features
Advanced Guide
Using Menus
Menu Description
Advanced Projection
Other Information
Maintenance
Product Specifications
Troubleshooting
ENG
MULTIMEDIA PROJECTOR
User’s Manual