Canon REALiS WUX500 D Pro AV MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 87

Menu Description Edge blending Brightness and colors of overlapping edges of images from multiple projectors, which form a blending area, can be adjusted for a more seamless appearance. For detailed instructions, see "Projecting from Multiple Projectors at Once (Edge Blending)" (P151). [Off] Disable blending. [Adjust] Display the menu for blending area adjustment. End marker Start marker Advanced Guide Menu Description Blending area Adjustment may not eliminate different colors or brightnesses in the blending area. For best edge-blending results, use all projectors in the same image mode and make the following adjustments. (1) Black, white, and color temperature adjustment, by adjusting brightness, contrast, R/G/B gain and offset (2) Color adjustment, by using 6-axis color adjustment (3) Gamma adjustment, by fine-tuning gamma (4) Corner adjustment, using keystone correction Option Side Color blending adjustment Left, Right, Top, Bottom Width Start position Function Select the direction of the blending area to adjust. Specify the width between the start and end markers. Moves the position of the start marker. • Large blending areas may cover input signal dialog boxes and other interface elements. In this case, momentarily set edge blending to [Off] and check the display. • Although the starting marker is normally aligned with the image edge, it can also be aligned toward the center of the image. In this case, the black blending area will lie outside of the starting marker. Adjust unwanted colors or discrepancies between colors in the blending area. Change the [White] value to adjust red, green, and blue together, and adjust [Red], [Green], and [Blue] values individually. 87