Canon REALiS WUX500 D Pro AV MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 93
User screen settings, Logo capture, Logo position, No signal screen, Screen when blank, Projector
View all Canon REALiS WUX500 D Pro AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
User screen settings > [System settings] > [User screen settings] Capture a logo and specify logo display settings. Menu Description Advanced Guide Menu Description Logo capture Registers the current image as a user logo. Registered user logos can be shown when no signal is received, when the BLANK button is pressed, or as the startup image. Option Function Display the image for logo registration. OK Align the image with the red boundary lines indicating the portion that will be stored, and then press the OK button. The portion of the image within the boundary lines is now registered. Cancel Cancels logo registration. Logo position Specify the position of registered user logos as follows. You can specify the position after a logo has been registered. Choose from upper left, upper right, center, lower left, or lower right. No signal screen Customize the screen shown when no input signals are received. Option Function Black The screen is all black. Blue The screen is all blue. User logo The user logo is projected. Screen when blank Select the screen shown when projection is temporarily blanked out by pressing the BLANK button on the remote control. Option Function Black The screen is all black. Blue The screen is all blue. User logo The user logo is projected. Projector on Select a logo to show after startup while the projector is warming up. Option Function Skip Project input signals immediately after startup. Canon logo Displays the Canon logo that was registered in advance at the factory. User logo The user logo is projected. 93