Canon REALiS WUX500 D Pro AV MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 18

Before Installation Precautions When Carrying/Shipping the Projector Prepare the projector as described below before carrying it. • Disconnect the cables connected to the projector. Carrying the projector with the cables attached may cause an accident. • Retract the adjustable feet before moving the projector. Leaving the feet extended may cause damage. Precautions for Installation Be sure to read "Safety Instructions" and "For Safe Use" (P5 - P17). Also take the following precautions during installation. • Do not strike the projector or Air intake vent subject it to impact. Doing so may cause a malfunction. • Do not install the projector so that it is inclined or standing vertically. The projector may be damaged if it tips over. • Do not block the air intake or Exhaust vent exhaust vents of the cooling fan. Blocking the vents may trap heat inside the projector, which may shorten the useful life of the lamp or damage the projector. ■ Do Not Use in the Following Environments • Locations with excessive humidity, dust, oily smoke or tobacco smoke Adhesion to the lens, mirrors or other optical parts may reduce image quality. • Near high-voltage power lines or sources of electrical power This may cause malfunction. • On soft surfaces such as carpets or cushioned mats Heat may build up inside the projector and damage it. • Locations with excessive temperature or humidity This may damage the projector. Acceptable ranges for operating and storage temperature and humidity are as follows. Operating temperature Operating humidity Storage temperature 0°C (32°F) - 40°C (104°F) Up to 85% -10°C (14°F) - 60°C (140°F) 18