Canon REALiS WUX500 D Pro AV MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 35
Remote Control Operating Range, Using an Optional Wired Remote (RS-RC05)
View all Canon REALiS WUX500 D Pro AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Before Use Before Use ■ Remote Control Operating Range The remote control is an infrared type. Point it at the infrared remote receiver on the front or rear of the projector to operate it. 25° 25° 8 m (26.3') 8 m (26.3') 25° 25° • Use the remote control within an angle of 25° in any direction from directly in front of the infrared remote receiver. • The remote control may be inoperative if there is an obstacle between the remote control and the projector or the infrared remote receiver on the projector is exposed to direct sunlight or strong light of lighting equipment. • When you use 2 or more projectors at the same time, you can change the channel settings to prevent the 2 remote controls from interfering with each other. (P95) ■ Using an Optional Wired Remote (RS-RC05) To use a wired remote control with the projector, use the RS-RC05, sold separately. Use a cable with a ø3.5 mm stereo mini jack (not included). Remote control (RS-RC05) Terminal for wired remote control ø3.5 mm stereo mini jack cable (not included) • Infrared operations cannot be performed if a cable is connected to the projector or the remote control. • Use a cable with a ø3.5 mm stereo mini jack (not included) with a length of 30 m (98.4') or less. 35