Canon REALiS WUX500 D Pro AV MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 183
There is no Sound, Cause, Countermeasure
View all Canon REALiS WUX500 D Pro AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
Troubleshooting Cause Images on a USB flash drive cannot be projected. The LAN cable (shielded twisted pair) is not connected correctly. A network connection cannot be established. Countermeasure Projection from USB flash drives requires JPEG images with a resolution not exceeding 10912x8640, single-byte alphanumeric file names, and a FATformatted drive. Check whether the LAN cable (shielded twisted pair) is connected to the projector correctly. (P105) Network connections are not available until about 40 seconds after startup. (P122) ■ There is no Sound Cause The audio cable is not connected correctly. The MUTE function is enabled. The volume level is adjusted to the minimum. An audio cable with a built-in resistor is used. Audio in terminal select is [Off]. Countermeasure Check the audio cable connection. (P43, P45) Press the MUTE button on the remote control. (P33) Press the VOL button on the remote control or the VOL+ button on the side control to adjust the volume level. (P28, P33) Use an audio cable without a built-in resistor. Change the Audio In terminal to the appropriate setting. (P95) Other Information Troubleshooting 183