Canon REALiS WUX500 D Pro AV MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 39
Installation on High Surfaces, Attaching Option Feet RS-FT01, Sold Separately
View all Canon REALiS WUX500 D Pro AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Basic Guide Installation Procedure Installation Procedure ■ Installation on High Surfaces For projection from a shelf or other high surface, the projector can be installed upside-down and the projected image inverted. In this case, attach the option feet on top of the projector. When setting the projector on a high surface for projection, be sure the surface is flat and stable. Failure to do so poses a risk of the projector falling and causing accidents or injury. Attaching Option Feet (RS-FT01, Sold Separately) Remove the hole caps and screw the option feet into the holes. The caps are located at four positions on top of the projector. They are removed differently depending on their position. Top (2) (2) (1) (1) Removing hole caps labeled (1) Pry off the caps by inserting a slender tool such as a flat screwdriver in the depression. 39