Canon REALiS WUX500 D Pro AV MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 150
Split-Screen Display
View all Canon REALiS WUX500 D Pro AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Advanced Projection Split-Screen Display Two input images can be projected side by side. This is split-screen display. When you activate split-screen display, the current image is shown on the left side, and the new image is shown at right. You can change the source of images shown on each side by pressing the INPUT button. However, you cannot specify the same input signal (terminal) as the source for both sides. Network and USB input cannot be combined for split-screen display. 1 Supply two signals to the projector. 2 Press the SPLIT button on the remote control or the MENU button on the projector to select the [Input settings] tab. When pressing the SPLIT button on the remote control, go to step 4. 3 Select [Split screen] and set it to [On]. • A number is displayed in the center of the screen. The screen at left is labeled "1," and the screen at right, "2." The image labeled with a number has "control rights," and the sound for that image will be played. • For split-screen image adjustment, use the [Image priority] setting (P82). • Some functions are not available, such as [Image flip H/V] (P84), [Screen aspect] (P84), [Keystone] (P85), [Digital image shift] (P85), [Professional settings] (P85) and [Logo capture] (P93). • Image mode colors differ somewhat from those in single-image mode. 4 If or is displayed in the center of the image area, you can switch control to the other side. 5 Press the INPUT button, and then select the input signal for the side with control rights. Side currently under control (input signal can be switched) Orange display Current input signal of side with control rights Green display Current input signal of side without control rights White display • If you specify [LAN] or [USB] as an input signal, the screen width is evenly divided between the left and right areas. (P73) • When projection resumes from standby or after the lamp is momentarily turned off in split-screen mode, display reverts to single-image mode, showing the input signal with display rights. 150