Canon REALiS WUX500 D Pro AV MULTIMEDIA PROJECTOR WUX500 Users Manual - Page 115
Detailed settings wireless
![]() |
View all Canon REALiS WUX500 D Pro AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Menu Description Detailed settings (wireless) > [Network settings] > [Detailed settings (wireless)] Display and manually change the wireless IP address, gateway address, and other settings. Available only when wireless networking is [On]. Advanced Guide Menu Description Menu Mode SSID Security Channel Signal strength IP address Gateway address MAC address Wi-Fi Protected Setup Function Shows the wireless connection mode. (P105, P106) Shows the access point SSID. Shows the security setting. Shows the channel used for the connection. Shows actual signal strength, as measured. Wireless IP address of the projector. Wireless gateway address of the projector. Wireless MAC address of the projector. Select the method of connection in infrastructure mode. Submenu PBC PIN Function Connect in PBC (push-button) mode. Following the instructions shown, press the button on the wireless base station (access point), and, within 2 minutes, select [OK] on the screen. Connect in PIN mode. Following the instructions shown, enter the displayed 8-digit PIN code on the wireless base station (access point), and, within 10 minutes, select [OK] on the screen. 115
![](/manual_guide/products/canon-realis-wux500-pro-av-multimedia-projector-wux500-user-s-manual-4c55d07/115.png)